AC Transformer Spot Welder DN25

Model NO.: DN25
Origin: China
HS Code: 85182900
Model NO.: DN25
Origin: China
HS Code: 85182900
25KVA DN-25K pneumatic spot welder power v 480+/-10% 60Hz / 240+/-10% 60Hz, capacity KVA According to the rating capacity, Switch Capacity A/380V 100, Lead line mm2 10, Hydraulic pressure kg/cm? 0.15, cooling water l/min 8, water temperature? 4? X? 30, service pipe diameter mm 10/12, terra line mm More than 4, air pressure Mpa 0.5, air temperature of the environment 5-40, relative humidity most relative humidity must be smaller than 90%
1 year warranty
length : 120  width : 120  height : 180  weight : 132kg
Input voltage : 415V Phase : 3PH Hertz : 50/60
Diameter length of arms : 400mm
Max weld capacity : 4+4mm
25KVA DN-25K pneumatic spot welder power v 480+/-10% 60Hz / 240+/-10% 60Hz, capacity KVA According to the rating capacity, Switch Capacity A/380V 100, Lead line mm2 10, Hydraulic pressure kg/cm? 0.15, cooling water l/min 8, water temperature? 4? X? 30, service pipe diameter mm 10/12, terra line mm More than 4, air pressure Mpa 0.5, air temperature of the environment 5-40, relative humidity most relative humidity must be smaller than 90%
1 year warranty
length : 120  width : 120  height : 180  weight : 132kg
Input voltage : 415V Phase : 3PH Hertz : 50/60
Diameter length of arms : 400mm
Max weld capacity : 4+4mm

Silicone Overmolding

Silicone overmolding is a process in which silicone rubber is molding with a [metal or plastic part" into mold cavity and then heated to cure, then have the final product which have protective and soft layer. It allowing products to combine the best of two different materials that soft silicone material & hard plastic or metal material.

Benefits of silicon overmolding
Quick cycle time
Less number of operations
Better aesthetic part
Enhanced part durability and performance.
Low cost per part for mass production
Application of the silicon overmolding
Medical
Automotive
Aerospace
Consumer Electronics
Controls
Silicon overmolding have many great advantage, different colors can be bonded, different hardness silicon material can be bonded, different materials can bonded, lower price with big volumne, not only unit price.also the mold cost is very lower. It also reduces the labors cost to instead of assembly. Please let us know your thoughts , we will give you the quick turn.

IMG_0535


Silicone Overmolding,Silicone Overmolding Process,Silicone Rubber Overmolding,Liquid Silicone Overmolding

Suzhou FCE precision electronics Co., LTD , https://www.fcesz.com