Customized Zinc Plated Threaded Rod (M3 to M 70)

Product Description
1) Threaded rod (threaded bar), DIN975, DIN976 according to DIN standard;
2) Class 4.8, 8.8, 10.9, 12.9 for carbon steel; Stainless steel A2-70, A4-80 (304, 316);
3) Size from M3 to M70, length from 100mm to 4000mm;
4) Surface treatment including: Plain, zinc plated, nickel plated, H. D. G., black, dacromet, mechanical zinc plated;
5) Packing: Packed by gunny bags with white, red, blue, purple colores, or other colores are available, and in tubs.

1) Threaded rod, ANSI/ASME B 18.31.3, ASTM A193 B7, B8 according to ASME standard;
2) Size from 1/8" to 3", length from 4" to 12';
3) Grade 2, 5, 8, B7 for carbon steel; Stainless steel A2-70, A4-80(304, 316), brass are available;
4) Surface treatment including: Plain, zinc plated, nickel plated, H. D. G., black, dacromet, mechanical zinc plated
5) Packing: Packed by gunny bags with white, red, blue, purple colores, or other colores are available, and in tubs.

ISO, JIB, BS standard are also available.




Product Description
1) Threaded rod (threaded bar), DIN975, DIN976 according to DIN standard;
2) Class 4.8, 8.8, 10.9, 12.9 for carbon steel; Stainless steel A2-70, A4-80 (304, 316);
3) Size from M3 to M70, length from 100mm to 4000mm;
4) Surface treatment including: Plain, zinc plated, nickel plated, H. D. G., black, dacromet, mechanical zinc plated;
5) Packing: Packed by gunny bags with white, red, blue, purple colores, or other colores are available, and in tubs.

1) Threaded rod, ANSI/ASME B 18.31.3, ASTM A193 B7, B8 according to ASME standard;
2) Size from 1/8" to 3", length from 4" to 12';
3) Grade 2, 5, 8, B7 for carbon steel; Stainless steel A2-70, A4-80(304, 316), brass are available;
4) Surface treatment including: Plain, zinc plated, nickel plated, H. D. G., black, dacromet, mechanical zinc plated
5) Packing: Packed by gunny bags with white, red, blue, purple colores, or other colores are available, and in tubs.

ISO, JIB, BS standard are also available.

For KATO Cylinder Seal Kit

The replacement process of excavator hydraulic cylinder is as follows:
1. Turn off the hydraulic system: Before replacing the hydraulic cylinder, it is necessary to turn off the system to avoid liquid leakage in the hydraulic system.
2. Disassembling the hydraulic cylinder: Disassembling the hydraulic cylinder requires the use of tools such as wrenches, screwdrivers, etc. Firstly, the hydraulic pipeline needs to be removed, and then the bolts of the hydraulic cylinder need to be removed to remove the hydraulic cylinder from the machine.
3. Check the hydraulic cylinder: Check if there is any damage to the hydraulic cylinder, and if there is any damage, replace it.
4. Install a new hydraulic cylinder: Install the new hydraulic cylinder onto the machine and secure the cylinder with bolts.
5. Connect hydraulic pipeline: Connect the hydraulic pipeline to the hydraulic cylinder, pay attention to the position and direction of the connection, and ensure that the connection is secure.
6. Test system: after replacing the hydraulic cylinder, it is necessary to test whether the system operates normally, check whether the hydraulic cylinder operates normally, and deal with any problem in time.
7. Cleaning work: Clean the liquid and debris in the hydraulic system to ensure that the system is clean and avoid any impact on the system.

For Kato Cylinder Seal Kit,For Kato Center Joint Seal Kit,Center Joint Seal Kit,Repair Kit For Kato Joystick

Safe Seal Technology Co., Ltd. , https://www.jolseals.com