Dongfeng Commercial Vehicles Steady in Industry Leading Position

Recently, Dongfeng Commercial Vehicle Co., Ltd. released the news: From January to August this year, the company sold nearly 120,000 cars (trucks, passenger cars), an increase of 3.5% year-on-year. Among them, the cumulative sales of medium- and heavy-duty trucks exceeded 113,000, an increase of 6% year-on-year, ranking the leading position in the medium and heavy truck industry.

In August, sales of medium and heavy trucks were nearly 9,000, a 2% increase from the previous quarter. Among them, heavy-duty trucks sold nearly 6,000 vehicles, down 1% year-on-year; from January to August, the cumulative sales were nearly 80,000 vehicles, up 5% year-on-year. China Card sold more than 3,000 vehicles, an increase of 18% over the previous month; from January to August, it sold over 33,000 vehicles, an increase of 7% year-on-year.

The industry predicts that there will be no significant changes in the macro environment in the second half of the year. It is expected that the annual GDP growth rate will be 7.6%. It is obviously impossible to rely on investment to drive truck demand growth. At the same time, due to the lack of supporting contents such as domestic oil products, the implementation of the National IV is only gradually progressing in the subregion, which is not conducive to the overall layout of the national IV commodity market.

In the face of a severe market environment, the company will take the following measures to ensure the effective achievement of the set goals throughout the year: in terms of production and operation, fully implement the concept of leanness, and reduce production costs and costs by rationalizing production schedules and using labor efficiently. Compared to the first half of the single CPU does not drop. At the same time, it strictly controls investment and prevents overcapacity. In response to the national IV challenge, it will speed up the development of new products, orderly import China IV goods, and handle the post-processing system to reduce the one-time purchase cost of vehicles. In the areas of commodities and technology, we will continue to promote the management of commodity nodes, ensure the promotion of plans under the premise of ensuring quality, and increase the profitability of commodities. Continuously carry out quality improvement work and comprehensively improve the QCD level so as to improve customer satisfaction.

Plastic & Rubber Processing Machinery

Plastic & Rubber Processing Machinery refers to general machinery, which manufacture and processing of rubber and plastic products.

The manchinery is used for EVA, PVC PE fpaming sole, rubber sole, TPR sole, rubber robber, rubber sponge, tyre, ball, rubber ring, rubber pipe, rubber belt, bottl stopper,oil seal, shock-resistant rubber, viscous adhesive tape, elastic tape, masterbatch, ink, electric rubber part, auto rubber product and chemical industrial blending materials.

18 inch refining mill

Advantage

1. The roller is made of chilled casting vanadium & titanium alloy iron which is hard and wear-resisting, the surface hardness is above 70degree, the surface coating is about 15mm.

2. Hard tooth gear reducer with well-design structure, low noise, high efficiency and long service life.

3. Self-aligning bearing is well matching with the bearing inside leakage-proof device. The sealers are made of high temperature,wear, oil resistance material,which have very good sealing effect.

4. All main electrics are imported, the alternating current contactor is Shilin brand. The switch and button are Taiwan Tend brand.

5. Circulating lubrication system solves the oil leakage problem. The feature of this system is easy to maintain,easy to replace.

6. This machine is installed with overload protection device which protect the machine will not broken if the machine is overload.

The machine will reverse 1/3 round when press the emergency stop button,which sure the production safety.

7. The [U" shape frame is whole set casting, but other factory welded together.

8. The machine base is welded by national standard I steel.

Main parameter:

Roller diameter (mm)	450
Roller length(mm)	1000
Front roller speed (m/min)	31.9
Speed ratio	1:1.27
Max roller gap(mm)	10
Nip adjustment	Manual
Mixing capacity(kg)	30-50
Power (kw)	55
Motor RPM(r/min)	980
Reducer ratio	35
Reducer model	375+
Gear width	input 70mm, output 140mm
Roller bearing diameter(mm)	300
Bearing model	352960YF
Bearing size(mm)	420×300×192
Machine size(mm)	4700x2000x1700
Machine weight(kg)	10000

Plastic Processing Machinery,Rubber Processing Machinery,Processing Machine For Plastic,Processing Machine For Rubber

SHIJIAZHUANG LONGXUAN TRADING CO., LTD , https://www.longxuanmachine.com