Factory Direct Sale Fabric Tape Cutting Machine
Â
Product Description
This machine is suitable for PP belt, zipper, nylon belt, braided belt, elastic belt, magic stick (adhesive buckle belt) seat belt, shoulder belt, casing, wire, etc for Fixed length cutting .Suitable for shoe making, leather bag, belt, leather goods, ready-made clothing, Electronic and other manufacturing processing.
Product Feature
 This machine adopts the microcomputer numerical control device, the number of the cutting band length is set at will, the cutter and the heat device can be used to heat and solidify the cut of the loom, without producing the rough edge, the design of the machine conforms to the principle of ergonomic operation and is easy to operate. Both save labor and greatly improve production efficiency.
Technical Parameter
Â
| Model | HT-ZX10 |
| Cut length | 0.1~9999.9mm |
| Cut width | 1-100mm |
| Power | 1hp |
| Voltage | 220.v |
| Weight | 35kg |
| Dimension | 450*400*430mm |
We have several models of this machine.The following are the brief technical parameters of other models.
Â
| Model | HT-ZX15 |
| Cut length | 0.1~9999.9mm |
| Cut width | 1-100mm |
| Power | 1hp |
| Voltage | 220.v |
| Weight | 125kg |
| Dimension | 600*700*1000mm |
Pictures of Product
Packing & Delivery
Company Certificates
Our Customers
Contact Us
If you need further information, please contact us freely, we will do our best to cooperate with you..
Â
Die Casting Parts:
The casting is a metal human control of hot working process relatively early, has a history of about 6000 years.In early 1700 BC to 1000 China has entered into casting heyday era,the technology has reached a very high level.
the material to be casting is usually solid but heated to a liquid metal (copper, iron, aluminum, lead, tin, etc.), and mold materials can be sand, metal and even ceramics. In response to different requirements, the use of the method will be different.
Different Category:
Casting blank is almost forming, which achieves the goal of free machining or less processing, reduces cost and reduces production time to a certain extent. Casting is one of the basic processes in modern equipment manufacturing industry.
(1) Sand casting:
Using sand as the mold material, also known as sand casting, foundry, including wet sand, dry sand and chemical hardening sand 3, but not all are available in sand casting. Advantage is low cost, because of the use of the mold sand can be reused; drawback is the mold manufacture time-consuming, repeated use casting model is not possible. To damage can be achieved after the finished product.
(2) Special Casting Process:
According to the special casting molding materials can be divided into natural mineral sand as the main materials (such as casting, mud casting, shell casting, vacuum casting, mold casting, ceramic mold casting, special casting and metal) as the main cast materials (such as metal casting, pressure die casting, continuous casting, low pressure casting, centrifugal casting, etc.
2.1 Metal mold casting method: using high melting point is the raw material made of metal mold. The subdivision for gravity casting, low pressure casting and pressure casting method. By casting the melting point can be cast metal has also been limited.
2.2 Lost wax casting method: this method can for membrane casting and solid casting. First the object copy the required casting wax, and then dipped into ceramic containing (or silica sol) in the pool and stay dry, the wax replica covered with a layer of ceramic membrane, repeating the steps until the outer membrane is sufficient to support the casting process (about 1/4 inch 1/8 inch), wax melting in the mold, and out of the mould. Then many times to enhance the mold temperature, the hardness can be used to rear casting.
Based on different casting raw material,we`ve Steel Die Casting,copper alloy die casting and aluminium alloy die casting.
Processing:
(1)The mold preparation (liquid metal become a solid container for casting ) according to the material used can be divided into sand, metal, ceramic, clay, graphite, according to the frequency of use can be divided into single type, semi permanent and permanent mold preparation, quality is the main factor affecting the quality of castings;
(2) The melting and casting;:casting metal (alloy) mainly include all kinds of cast iron, cast steel and casting of nonferrous metal and alloy castings;
(3) The processing and inspection: casting processing including removal of the core and the casting surface removal of foreign body, riser, shovel thorn and sanding fash protrusions and heat treatment, plastic. Anti rust and rough machining.
Die Casting Parts,Steel Die Casting,Copper Die Casting,Aluminium Die Casting
VESTA Motoring Ltd , http://www.vesta-industry.com