Fuel Flow Meter
Fuel Flow Meter(A+E 82FY)
Diesel flow meters use the mechanical energy of the fluid to rotate a pinwheel (rotor) in the fluid diesel. Blades on the rotor are angled to transform energy from the fluid diesel into rotational energy. The rotor shaft spins on bearings. When the diesel moves faster, the rotor spins proportionally faster.
Features
--Accuracy reaching ±1.0%F·S.
--Short-term repeatability reaching 0.05%~0.2%.
--Output pulse frequency signal, which is suitable for gross metering and connection to the computer. No zero drift and strong anti-interference capability.
--3-4kHz frequency signal , and high signal resolution.
--Wide range with 1:20 for medium and large caliber, 1:10 for small caliber.
--Compact and light structure, convenient installation and maintenance, great capability.
--Suitable for measuring high pressure. Easy to be made into high-pressure meter.
--Various kinds of specified sensors.
This diesel flow meter has a wide measuring range, and the limit of the flow velocity is lower than 0.5m/s. The pressure loss is low and the impeller has strong impact resistance, anti-electromagnetic interference and anti-vibration capability. So the performance is reliable and the operating life is long. Turbine diesel flow meter has the advantages of built-in pressure & temperature sensor, high safety, compact structure, beautiful appearance and small pressure loss.
Technical Parameters
Model Selection
| Model | A+E 82F | Â |
| Media | Y | liquid |
| Q | gas (excluding stream) | |
| DN | xx | Â |
| Structure | Z | integrate type |
| L | split type | |
| Senor Requirement | 1 | normal |
| 2 | wear-resistant | |
| 3 | anti-corrosive | |
| PN | 1 | 1.6MPa |
| 2 | 2.5MPa | |
| 3 | 4.0MPa | |
| 4 | 6.3MPa | |
| 5 | 16MPa | |
| 6 | 25MPa | |
| 7 | 40MPa | |
| Connection | G | non-sealed pipe thread |
| R | sealed thread | |
| F | flange | |
| J | clamp-on | |
| K | quick-release | |
| Accuracy | 1 | 0.2 |
| 2 | 0.5 | |
| 3 | 1 | |
| Explosion-proof | 0 | N/A |
| 1 | Yes | |
| Output | 1 | pulse |
| 2 | 4-20mA | |
| 3 | Hart | |
| Power Supply | 1 | built-in battery |
| 2 | built-in battery and out 24VDCÂ | |
| 3 | out 24VDC | |
| Material | 1 | 304L |
| 2 | 316L |
The anchor drilling rig is mainly used in hydro power stations, railways and highways, in order to prevent and control various geological disasters, anchoring operations are carried out on landslides and dangerous rock masses.It is mainly used in landslide and dangerous rock anchoring projects in tunnels, railways, highway slopes and other kinds of geology, especially for high slope rock anchoring projects. Drilling operations consume less manpower and material resources, have high construction efficiency and high safety factor. It is also suitable for the construction of deep foundation pit support, reinforcement hole for anti-float anchor and foundation grouting, blast-hole in blasting project, high pressure sprinkling stake and tunnel pipe support hole, etc..
The drilling technology with casing of anchor drilling rig is designed to solve the problem that complex rock layers cannot be holed. The drill bit impacts rock continuously, and the broken rock is blown to the ground by the air pressure discharged from the gap between the casing and the drill pipe. The drill pipe and bit can be lifted after punching the hole, and the casing is placed in the middle of the rock layer, so that the rock layer doesn't collapse.
Anchor Drilling Machine,Roof Bolter,Bolting Machine,Anchor Bolt Drilling Machine
JIANGSU XI TEC ENVIRONMENTAL&DRILLING EQUIPMENT COMPANY CO.LTD , https://www.xitecdrilling.com