Golf electric sightseeing car maintenance points

As a high-end project, golf is generally favored by the upper class. We can often appreciate the natural beauty of golf courses in film and television dramas. I wonder if everyone noticed that in addition to golf clubs and related equipment, there are often the same props that often appear, that is, golf electric sightseeing vehicles . For this high-end sports professional car maintenance, the points are more elaborate. Including the daily body cleaning and maintenance, the reinforcement of all parts of the connection and so on. Let us briefly understand the maintenance points of the golf electric sightseeing car.

First, the cleaning and maintenance measures for the inside and outside of the golf electric sightseeing vehicle. Because of the diversification of the natural environment of the golf course, the route traveled by the sightseeing vehicle may cause the vehicle body to be covered with dust and dirt, because the dust in the convertible design vehicle is also more likely to be deposited. Therefore, in the daily cleaning, the dirt on the tire, the dust on the bodywork and the glass must be promptly removed. Wipe the inside and outside of the sightseeing car with a clean cleaning tool. Remove the dirt on the car mirror lights in time. Keep the vehicle clean every day without affecting driving and comfort.

Second, regular monitoring of the tire pressure of the four-wheeled vehicle of the golf electric sightseeing car. The scenic area of ​​the golf course is not flat. If the tire pressure of the tire is insufficient or unbalanced, the balance of the car will be greatly reduced, which may result in serious damage to the golf electric sightseeing vehicle and the passengers. Therefore, the problem of the found tire should be inflated in time, and check whether the related connector is firm.

Third, check whether the battery of the golf electric sightseeing car is working properly. As a power source for sightseeing vehicles, the normal work of the battery is the ultimate guarantee of safety in driving. Before daily driving, check whether the battery is fully charged and the voltage is stable. If it is abnormal, it cannot be driven easily and promptly repaired.

Fourth, the brake system of the electric sightseeing car is confirmed to work normally before driving. Check whether brake fluid in the brake system is adequate and whether the system components are flexible and flexible.

The maintenance points of the golf electric sightseeing car mentioned above are not difficult to do. It is important to have long-term and orderly inspection and maintenance habits. In this way, the safety and service life of the golf electric sightseeing vehicle can be efficiently improved.

Fittings and Parts of Crushing Machines

There are several fittings and parts commonly found in crushing machines, including:

1. Jaw Plates: These are the main wear-resistant parts of the crushing machine. They are fixed on the jaw body and provide the crushing surface for the material.

2. Toggle Plates: These plates are connected to the toggle beam and help in adjusting the opening of the crusher. They also protect the machine from overloading.

3. Eccentric Shaft: This is a critical component that provides the rotational motion to the jaw crusher. It is usually made of high-grade forged steel and is responsible for transmitting the crushing force to the material.

4. Flywheel: The flywheel is a heavy metal wheel attached to the eccentric shaft. It helps in maintaining the momentum of the crushing machine and reduces the load fluctuations during the crushing process.

5. Bearings: Bearings are used to support the rotating components of the crushing machine, such as the eccentric shaft and the flywheel. They ensure smooth operation and reduce friction.

6. Crushing Chamber: The crushing chamber is the space between the fixed jaw plate and the movable jaw plate. It is where the actual crushing of the material takes place.

7. Wedges: Wedges are used to adjust the gap between the fixed and movable jaw plates. They help in controlling the size of the crushed material.

8. Springs: Springs are used to provide the necessary force for the jaw plates to return to their original position after crushing the material.

9. Belt and Pulley System: This system is used to transmit power from the motor to the crushing machine. It consists of a belt connected to the motor and pulleys attached to the flywheel and eccentric shaft.

10. Guard Plates: Guard plates are used to protect the crushing machine from damage caused by foreign objects or excessive wear.

electrical crusher fittings, crushing fittings, crusher fittings

SiChuan TieYing Machinery Manufacturing CO.,LTD; , https://www.tieyingcrushers.com