Hazard source identification of bracket truck
1. Hazard source: The surrounding environment has not been checked.
Description of risk and its consequences: It is easy to bruise or bruise the driver of the rubber tire.
Pre-control measures: Check the surrounding environment for safe and reliable support; no obstacles in the operating range, easy to operate and look forward to.
2. Hazard source: Safety inspection of the carriage is not carried out.
Description of risks and consequences: Easy to cause accidents.
Pre-control measures: The amount of oil and water in the carriage must be sufficient. The lighting, taillights, handlebars, brakes and fire extinguishers must be complete and in good condition.
3. Hazard source: debris splashes during the lowering of the carrier truck blade.
Description of risk and its consequences: It is easy to cause spatters to injure people.
Pre-control measures: It is strictly forbidden to stand around during the lowering of the blade.
4, the source of danger: two people standing when loading the bracket.
Description of risk and its consequences: It is easy to cause the stent to fall and hurt people.
Pre-control measures: When loading the vehicle, it is strictly forbidden to stand on both sides of the bracket.
5. Hazard source: The special large chain is not tightened after loading.
Description of risk and its consequences: It is easy to cause the bracket to overturn and injure people.
Pre-control measures: The special large chain of the trailer truck must be tightened after loading.
6. Hazard source: There are no shortage of people in the running route of the bracket truck.
Description of risks and consequences: susceptible to bruises or crush injuries.
Pre-control measures: No personnel are allowed to enter except the signal guides in the running route of the carriage.
7, the source of danger: driving when pedestrians.
Description of risks and consequences: susceptible to bruises or crush injuries.
Precautions: Pedestrians are strictly prohibited when the carriage is in operation.
8, the source of danger: the bracket truck did not whistle when turning, the speed is too fast.
Description of risk and its consequences: It is easy to cause people to hit the pedestrian. When the corner is turned, the middle shaft breaks and hurts people.
Pre-control measures: Decelerate the whistle when turning, and advance at a constant speed.
9. Hazard source: The driver is scratched by the long anchor cable during the operation of the bracket truck.
Description of risk and its consequences: It is easy to cause the driver to scratch the long cable.
Pre-control measures: The driver should concentrate on the operation of the support truck and find that there are long anchor cables to bypass and slow down.
10. Hazard source: The running speed is not stable.
Description of risks and consequences: Easy to cause rollover accidents.
Pre-control measures: During the process of transporting equipment, the speed should be slowed down.
Copper conductive rate is very good,machining copper(including Machining Brass,machining bronze) is the use of CNC machining out, including turning, drilling, cutting, and screw teeth, etc.. Machining copper commonly used materials: copper, brass, bronze, beryllium copper. the surface treatment is generally silver plating, gold, some laser LOGO, we have a special inspection department to carry out inspection, and ensure that each size to meet the requirements of the drawings, including machining copper applied in various industries: household appliances, conductive slip ring, communications, medical equipment, industrial automation equipment.
Machining Copper,Machining Beryllium Copper,Micro Machining Copper,Electrical Discharge Machining Copper,Copper Machining
Hong Kong RYH CO., LTD , https://www.cncmachiningpart.com