High Frequency Induction Heating Machine for Wire Strip Annealing
High Frequency Induction Heating Machine for Wire Strip Annealing
Annealing (tempering and modulation):
1. Annealing of various stainless steel products,such as stainless steel basin, annealed and extruded can, stainless steel tube, tableware and cup.
2. Annealing of various other metal work pieces,
such as golf ball head, hardware copper fitting, aluminum radiator and various aluminum products.
More Application for the induction heating machine:
1, Brazing: it can be used for the brazing of various hardware cutting tools, diamond tools including diamond circular saw from diameter 300-2500mm, abrasive tool, drilling tool, alloy saw blade, hard alloy cutter, milling cutter, reamer, planning tool and solid center bit etc. It is suitable to used for the brazing of circular saw and other tools, usually 9 to 15 seconds is needed to braze one diamond blade.
2, Heat treatment: heat treatment of small parts
3, Melting: Melting below 2KG for gold, sliver, copper, brass, steel and iorn etc4,Forging,
5, Hardening
6, quenching
7,Annealing
Main characteristics:
1, MOSFET and Inverting technologies of First generation been used;
2, Simple structure and light weight;
3, Simple to operate, A few minutes is enough to learn it;
4, Simple to install, Installation can be done by unprofessional person very easily;
5, Advantages of the model with timer: The power and the operating time of the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability;
Installing Desire
1, power supply wire: 6mm2 soft copper; Ground wire 4mm2 soft copper;
2, cooling water desire: Clean and not easy to scale, Inlet water temperature 25-36degree';
3, cooling water systerm: Running water; Circulating water from a pump to a tank; Use an industry refrigerate machine
.
Some application exeampleÂ
Â
| Model | Input power | Frequency | Input voltage | Duty cycle | Heating current | Retaining current | Time control | Size CM/weight |
| GHF-30B | 30KW | 30-80KHZ 30-80KHZ |
 380V,415V,440V, 50/60Hz, three-phase  |
 100% |
 10-70A |
 |  | Generator: 60*26*50/28KG Transformer: 47*27*40/26KG |
| GHF-30AB | 30KW | 10-70A | 1--99s | |||||
| GHF-40B | 40KW | 10-90A | Â | Â | Generator: 60*26*50/36KG Transformer: 47*27*40/33KG |
|||
| GHF-40AB | 40KW | 10-90A | Â 1--99s |
|||||
| GHF-50B | 50KW | 10-105A | Â |
  |
Generator: 60*26*50/40KG Transformer: 51*27*40/39KG |
|||
| GHF-50AB | 50KW | 10-105A | 1--99s | |||||
| Cable lengthfrom generator to transformer is 2 meters, and max. length is 6 meters | ||||||||
FAQ
Q: What's your advantage? Why we choose you?
A: 1,Our factory has over 15 years induction line production experience, we have rich experience in the production and design the induction technology machine for customers.
 2, Great production capacity Sustainable Supply . According to customer requirements, We support the customized including the packing
3,  We use 100% new materials and the striclty control for the  production process, in consequence our defective rate is lower than 0.01%
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: How about warranty
A: 12 Months
A: Sure, we double test all our machines before delivery
For more questions or details about us and our machines, please contact us as below,
Â
High Frequency Induction Heating Machine for Wire Strip Annealing
Annealing (tempering and modulation):
1. Annealing of various stainless steel products,such as stainless steel basin, annealed and extruded can, stainless steel tube, tableware and cup.
2. Annealing of various other metal work pieces,
such as golf ball head, hardware copper fitting, aluminum radiator and various aluminum products.
More Application for the induction heating machine:
1, Brazing: it can be used for the brazing of various hardware cutting tools, diamond tools including diamond circular saw from diameter 300-2500mm, abrasive tool, drilling tool, alloy saw blade, hard alloy cutter, milling cutter, reamer, planning tool and solid center bit etc. It is suitable to used for the brazing of circular saw and other tools, usually 9 to 15 seconds is needed to braze one diamond blade.
2, Heat treatment: heat treatment of small parts
3, Melting: Melting below 2KG for gold, sliver, copper, brass, steel and iorn etc4,Forging,
5, Hardening
6, quenching
7,Annealing
Main characteristics:
1, MOSFET and Inverting technologies of First generation been used;
2, Simple structure and light weight;
3, Simple to operate, A few minutes is enough to learn it;
4, Simple to install, Installation can be done by unprofessional person very easily;
5, Advantages of the model with timer: The power and the operating time of the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability;
Installing Desire
1, power supply wire: 6mm2 soft copper; Ground wire 4mm2 soft copper;
2, cooling water desire: Clean and not easy to scale, Inlet water temperature 25-36degree';
3, cooling water systerm: Running water; Circulating water from a pump to a tank; Use an industry refrigerate machine
.
Some application exeampleÂ
Â
| Model | Input power | Frequency | Input voltage | Duty cycle | Heating current | Retaining current | Time control | Size CM/weight |
| GHF-30B | 30KW | 30-80KHZ 30-80KHZ |
 380V,415V,440V, 50/60Hz, three-phase  |
 100% |
 10-70A |
 |  | Generator: 60*26*50/28KG Transformer: 47*27*40/26KG |
| GHF-30AB | 30KW | 10-70A | 1--99s | |||||
| GHF-40B | 40KW | 10-90A | Â | Â | Generator: 60*26*50/36KG Transformer: 47*27*40/33KG |
|||
| GHF-40AB | 40KW | 10-90A | Â 1--99s |
|||||
| GHF-50B | 50KW | 10-105A | Â |
  |
Generator: 60*26*50/40KG Transformer: 51*27*40/39KG |
|||
| GHF-50AB | 50KW | 10-105A | 1--99s | |||||
| Cable lengthfrom generator to transformer is 2 meters, and max. length is 6 meters | ||||||||
FAQ
Q: What's your advantage? Why we choose you?
A: 1,Our factory has over 15 years induction line production experience, we have rich experience in the production and design the induction technology machine for customers.
 2, Great production capacity Sustainable Supply . According to customer requirements, We support the customized including the packing
3,  We use 100% new materials and the striclty control for the  production process, in consequence our defective rate is lower than 0.01%
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: How about warranty
A: 12 Months
A: Sure, we double test all our machines before delivery
For more questions or details about us and our machines, please contact us as below,
Â
Touchless Car Wash,Touchless Car Wash Reddit,Non Touch Car Wash,No Touch Car Wash
Hangzhou Leisu Cleaning Equipment Co.,Ltd , https://www.leisuwashtech.com