Mine management system
"Killing" system for safety and quality work
a) If there is a shifting work site, there must be a management cadre on duty, and accidents should be investigated and dealt with during this period.
2) The first person in charge shall be fully responsible for the safety production and the quality of the project. At the same time, it shall implement the life-long responsibility system of the competent engineering and technical personnel for the quality of the project under its jurisdiction. If any violation of the rules and regulations is found, the responsibility of the person causing the loss shall be investigated.
c) Anyone who violates the rules of command and discovers that the illegal operation is not resisted and causes an accident must be investigated and handled seriously.
4) Implementing the “three-level education†system for new employees:
1. Labor discipline, construction discipline and corporate knowledge education;
2. Education of safety knowledge and operating procedures;
3. Post responsibility education.
The third-level education time of new employees shall not be less than 72 hours, and they shall be employed after passing the examination. If an accident occurs without a safety education, the responsibility of the first person in charge of the unit and the personnel department shall be investigated.
5) Adhere to the regular inspection system for safe production and fill in the inspection records as required.
6) Do a good job of shifting records and adhere to weekly regular safety activities, and make a record.
VII) The tunnel excavation operation shall be set up for full-time job to find the top; the inclined and vertical shaft shall be selected for the full-time picking; the main line of the inclined shaft shall not be hooked; the anti-slip and anti-fall system of the inclined and vertical shaft shall be implemented, and the safety performance of the anti-slip and anti-falling facilities shall be strictly checked. When dealing with an accident, it is necessary to investigate the responsibility and deal with it seriously.
VIII) Construction shall be carried out in strict accordance with the technical basis, and technical measures shall be improved to prevent the tunnel from collapsing. The progress of excavation, the amount of explosives, ventilation, drainage, etc. shall be constructed in accordance with the technical requirements, and shall not be changed at will. Those responsible for the accident shall be investigated for responsibility and dealt with seriously.
IX) The blasting operation must be unified and commanded, and the safety officer, the shift supervisor, and the blaster must be “three to the fieldâ€. The blasting shall be carried out by “one shot and three inspection system†(before loading, before shooting, after shooting), and the protection distance shall meet the safety requirements.
10) Personnel entering the well and entering the construction site must wear safety helmets; high-level workers must wear seat belts; female workers in mechanical operations must wear work hats; construction sites are prohibited from wearing high-heeled shoes, slippers, and illegal rides. XI), it is strictly forbidden to drink after work (within 4 hours).
12), treatment of drunk driving cars, rail cars, loaders and other types of walking machinery:
1. Drivers are required to wait or be laid off regardless of whether they have caused an accident. In case of accidents, in addition to the rulings of relevant departments, economic compensation and administrative treatment shall be carried out according to the losses.
2, illegal use of the car, depending on the specific circumstances to give serious treatment.
3. For the whistleblower, verify the content of the report and reward it.
4. The management personnel who concealed and sheltered the drunk driving will be given serious treatment.
Mine management system
Nineteen "dead" systems for safety and quality work
a) If there is a shifting work site, there must be a management cadre on duty, and accidents should be investigated and dealt with during this period.
2) The first person in charge shall be fully responsible for the safety production and the quality of the project. At the same time, it shall implement the life-long responsibility system of the competent engineering and technical personnel for the quality of the project under its jurisdiction. If any violation of the rules and regulations is found, the responsibility of the person causing the loss shall be investigated.
c) Anyone who violates the rules of command and discovers that the illegal operation is not resisted and causes an accident must be investigated and handled seriously.
4) Implementing the “three-level education†system for new employees:
1. Labor discipline, construction discipline and corporate knowledge education;
2. Education of safety knowledge and operating procedures;
3. Post responsibility education.
The third-level education time of new employees shall not be less than 72 hours, and they shall be employed after passing the examination. If an accident occurs without a safety education, the responsibility of the first person in charge of the unit and the personnel department shall be investigated.
5) Adhere to the regular inspection system for safe production and fill in the inspection records as required.
6) Do a good job of shifting records and adhere to weekly regular safety activities, and make a record.
VII) The tunnel excavation operation shall be set up for full-time job to find the top; the inclined and vertical shaft shall be selected for the full-time picking; the main line of the inclined shaft shall not be hooked; the anti-slip and anti-fall system of the inclined and vertical shaft shall be implemented, and the safety performance of the anti-slip and anti-falling facilities shall be strictly checked. When dealing with an accident, it is necessary to investigate the responsibility and deal with it seriously.
VIII) Construction shall be carried out in strict accordance with the technical basis, and technical measures shall be improved to prevent the tunnel from collapsing. The progress of excavation, the amount of explosives, ventilation, drainage, etc. shall be constructed in accordance with the technical requirements, and shall not be changed at will. Those responsible for the accident shall be investigated for responsibility and dealt with seriously.
IX) The blasting operation must be unified and commanded, and the safety officer, the shift supervisor, and the blaster must be “three to the fieldâ€. The blasting shall be carried out by “one shot and three inspection system†(before loading, before shooting, after shooting), and the protection distance shall meet the safety requirements.
10) Personnel entering the well and entering the construction site must wear safety helmets; high-level workers must wear seat belts; female workers in mechanical operations must wear work hats; construction sites are prohibited from wearing high-heeled shoes, slippers, and illegal rides. XI), it is strictly forbidden to drink after work (within 4 hours).
12), treatment of drunk driving cars, rail cars, loaders and other types of walking machinery:
1. Drivers are required to wait or be laid off regardless of whether they have caused an accident. In case of accidents, in addition to the rulings of relevant departments, economic compensation and administrative treatment shall be carried out according to the losses.
2, illegal use of the car, depending on the specific circumstances to give serious treatment.
3. For the whistleblower, verify the content of the report and reward it.
4. The management personnel who concealed and sheltered the drunk driving will be given serious treatment.
Do you know what is 27.5 inches for E Bike?or Do you know the Size for Ebike Tire for Mountain E Bike ? 27.5 inches here refer to the diameter of the front and rear wheels of the Electric Bicycle, not the size of the Ebike Frame. This number must be clearly distinguished by everyone. This wheel diameter size is a common size in the bicycle industry, and according to different market demands of different people, there are also 26 inch, 24 inch, 20 inch, and even 10 inch wheel diameters available, which can be described as a dazzling array. Our 27.5-inch diameter wheels are mainly used for mountain Electric Bicycles, such as the MC01, MC02, and LiXa models. Because electric mountain power bicycles require more safety and speed when riding on bumpy roads. If you are also an outdoor cycling enthusiast, choosing our mountain electric power bicycles is a good choice for you.If you don't like it ,we can also customize it as per your personal needs.if you don't like the material of the Ebike Frame ,which can be
Electric Bike ,Electric Bike 5 Year Warranty,Electric Mtb
Ejoysport Technology (SuZhou)Co.,LTD , https://www.yqejoysport.com