Parameters of Dongfeng Tianjin Branch Washing and Sweeping Vehicle

 The washing and sweeping truck adopts Dongfeng Tianjin DFH1180EX8 type national six second category vehicle chassis modification, adding auxiliary engine, fan, high pressure water pump, clean water tank, trash can, left and right vertical sweep, wide suction nozzle with water spray rod, low pressure washing system, The sweeping dust suppression system, hydraulic system, special device electric control system and sub-frame etc. are refitted.

 The auxiliary engine drives the fan and high-pressure water pump, and the auxiliary engine uses a Dongfeng Cummins six-cylinder 170-horsepower diesel engine. The fan uses an 8.0 high-pressure centrifugal fan, which has high efficiency and large air volume, with a maximum air volume of 23,500m 3 /h. The high-pressure water pump adopts the internationally-known plunger pump with suitable flow and high pressure, and the maximum allowable pressure is 10MPa

Consultation hotline; 15271341199

 The clean water tank makes full use of the vehicle-mounted space, and has a large volume with a volume of 9m 3 . The trash bin adopts single stainless steel structure, dumping and unloading, with high-pressure self-cleaning device. The self-cleaning device can help unloading and cleaning the inside of the trash can when unloading the trash can.

 The left and right vertical scanning is a single scanning plate, which reduces the number of brushes and the consumption of brushes, and can reduce the cost of use. The left and right vertical sweeps are controlled separately, and different operation modes such as left sweep, right sweep and full sweep can be realized. The width of the suction mouth of the wide suction nozzle reaches 2418mm, ensuring that the total working width is greater than 3.5mm. The 4 height-adjustable nozzle wheels can adjust and ensure a reasonable gap between the nozzle and the road surface. The suction nozzle has a built-in high-pressure water spray rod, and as many high-pressure washing nozzles as possible are arranged inside the suction nozzle, which not only has a good cleaning effect, but also minimizes the secondary pollution caused by the high-pressure water flow.

 The left and right spray rods are installed on the suction cups and move up and down with the suction cups. The structure is simple and compact, which ensures that the height of the spray rods from the ground is constant and achieves the best cleaning effect. The open hydraulic system drives the left and right vertical sweeping and lifting, the left and right sweeping pan rotation, the suction nozzle lifting, the opening and closing of the rear door of the trash can, and the dumping and resetting of the trash can.

 The power take-off on the gearbox side of the chassis drives the low-pressure water pump to realize the low-pressure flushing function of the sprinkler, and one-button start and stop operations.

 The CSC5180TXSD6 sweeper has multiple functions such as road cleaning, road cleaning, curb cleaning, curb and curb facade scrubbing, low-pressure washing, spray dust removal, etc. There are multiple operation modes such as "full wash and sweep", "left wash and sweep", "right wash and sweep", "full sweep", "left sweep" and "right sweep" to choose from. Choose "full washing and sweeping" mode to clean the square and pavement, the cleaning efficiency is high and the effect is good, and the cleaning rate is more than 90%. Choose "left washing and sweeping" or "right washing and sweeping" mode to clean the road surface and curbs, and scrub the curb facade. When road cleaning or road cleaning operations are required, the road sweeping mode can be selected. When spray dust removal is required, the spray device can be turned on to perform spray dust removal operations. The road surface can be washed with low pressure like a sprinkler.

 CSC5180TXSD6 sweeper is suitable for cleaning operations such as mechanized cleaning, sweeping, spraying and dust suppression of urban roads, highways, squares, airports, docks, tunnels, bridges, isolation walls, curbs and curb facades.

Consultation hotline; 15271341199