Re-election of antimony ore

Reselection is based on different media stream in minerals, or having different sedimentation velocity method of sorting, including mineral jig (vertical flow), mineral shaker (ramp flow) and a centrifugal concentrator (rotational flow) and Heavy medium beneficiation, that is, ore is sorted in a resuspension.
The density of stibnite is 4.26g/cm 3 , the density of gangue is 2.6 ∼ 2.65g/cm 3 , and the equal drop ratio is 2.19 ∼ 2.26, which belongs to the easy-selected ore sorted by density. Huang Yuhua (5.2g/cm 3 ), red sputum ore (7.5g/cm 3 ), 锑 ( (5.57 g/cm 3 ), and the equivalence ratio to gangue were 2.55 ∼ 2.63, 3.93 ∼ 4.06 and 2.76 ∼ 2.86 These three types of antimony ore are ore that are easily sorted by density. Only the mink calcite density is 3.14 g/cm 3 , and its equi-drop ratio is only 1.29, which is a harder sorting ore.
Re-election costs are generally lower than flotation and can be used as a pre-selection process to remove large amounts of gangue before entering flotation. Due to the difficulty of flotation of yttrium oxide ore, it is still mainly re-election at this stage.
Heavy medium dressing is a new technology for re-election. Guangxi China in 1966 CHANGPO Concentrator, 1975 South tin mine processing plant to achieve the heavy media beneficiation of antimony ore. The dense media, the long slope in Mineral Processing plant for factory production pyrite arsenic, tin Shannan ferrosilicon processing plant, both the process and sorting index are listed in Table 1 and FIGS. I and FIG. II and Table 2.
Figure 1 Flow chart of heavy medium ore dressing in tin mine
Table 1 Heavy medium selection conditions and indicators of Dachang Changpo Plant
Selection condition
Processing capacity
Feeding granularity
Media suspension density
Mine ratio
Pressure on
30 ∼ 40t·h -1
-20 ∼ +4mm
2.3 ∼ 2.6g·cm -3
1:2 ∼ 1:4
1.18×10 4 ∼ 1.47×10 4 Pa
Selection indicator
The ore contains Pb 0.43% ∼ 0.83%, Sb 0.35%
Tailings contain Pb 0.044% ∼ 0.119%, Sb 0.039%
Recovery rate Pb(Sb)91.15% ∼ 96.4%
The waste rock yield is 38.89% for the original ore and 44.94% for the operation.
Heavy product contains Pb 0.48% ∼ 1.05%
Direct cost of 1.16 yuan per ton of ore (1980)
Figure 2 Flow chart of heavy medium ore dressing in Dachang Changpo Plant
Table 2 Separation conditions and indicators of heavy medium in tin mine south selection plant
Selection condition
Processing capacity
Feeding granularity
Media suspension density
Mine ratio
15 ∼ 20 t·h -1
-35 ∼ +10mm
2.26 ∼ 2.65 g·cm -3
1:1 ∼ 1:1.5
Selection indicator
The ore contains Sb1.58% tailings containing Sb 0.18%, the recovery rate is 95.11%
Waste rock yield accounted for 43.3% of operations
Heavy products contain Sb2.65%, light products contain Sb0.18%
Direct cost per ton of ore is 1.4 yuan (1980)

Suspended Platform

Suspended platform, as temporary suspended cradle platform, are widely applied in maintenance applications such as curtain fecade cleaning in high rise building, painting, glazing repairs, bill- board painting, cable installation and other outer working of high rise building up to 150 meters about 30 floors high. Our ZLP series suspended platform cradle, ZLP1000, ZLP800, ZLP630, ZLP500, ZLP400 and ZLP150, are good choices for fulfill above outside of wall work. Based on the different materials, the suspended platform could be divided into Aluminum Working Platform, steel Working Platform, galvanized Working Platform.

ZLP series temporarily installed suspended platform is an ideal access equipment for building facade construction, decoration, cleaning and maintenance. It can be also applied to other aerial working such as elevator installing, ship building, construction of dam, bridge, large chimney, etc.

This equipment is easy to operate, convenient to move and reliable in safety and much more efficient than traditional scaffolding.


Suspended Working Platform,Suspended Cradle Platform,Aluminum Working Platform,Suspended Construction Platform,Working Platform Cradle

SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sczenghui.com