Renewable energy equipment development will be supported

“The lack of independent technology research and development capabilities, weak equipment manufacturing capabilities, and technology and equipment production rely mainly on imports.” This is one of the main manifestations of China's renewable energy technology development capabilities and weak industrial systems, but this situation is expected to change in the future.
The National Development and Reform Commission recently issued the "Eleventh Five-Year Plan for Renewable Energy Development" (hereinafter referred to as the "Planning"). "Planning" clearly puts forward the overall objective of "improving R&D capability and industrialization level of renewable energy technologies". In addition, the "Planning" also put forward guidance on technical equipment and industrial development for hydropower, biomass, and wind power. This indicates that renewable energy technology equipment and industrial development will be substantially promoted.
Strengthen technological reform and strengthen independent innovation of hydropower
In order to promote technological equipment and industrial development, the "Planning" pointed out that in the area of ​​hydropower, it will further improve and improve the technical level of hydropower surveying, design, construction, management and equipment manufacturing, and focus on strengthening the construction of high dams under 300m high dams and complex geological conditions. Technical research on dam technology, large-scale underground caverns and high slope anchoring technologies, key technologies for flood discharge and energy dissipation at high heads, etc.; continue to promote the localization of large-scale conventional hydropower units and pumped-storage units to digest and absorb foreign advanced technologies. At the same time, it strengthened independent innovation, strengthened technological transformation, and carried out research on the design and manufacturing technology of 60,000 kilowatts or more of tubular, million kilowatt-class Francis turbine units and 300,000 kilowatts of pumped storage units, resulting in autonomous knowledge. Property rights of hydropower equipment manufacturing technology.
Research and development of large-scale biogas power generation equipment
In terms of biomass energy, the “planning” requirement for power generation equipment is: during the “Eleventh Five-Year Plan” period, on the basis of pilot projects, through the introduction of digestion and absorption and re-innovation, agricultural straw biomass and other forestry biomass are organized. Equipment R&D and manufacturing of power generation and waste power generation, mastering biomass power generation technology; grasping the development and production of large-scale biogas power generation equipment, forming a series of products with 500 kW and 1,000 kW, etc.; grasping a small scale of 50-200 kW The supporting R&D and manufacturing of biomass gasification power generation equipment has formed specialized equipment production and supporting capabilities, and has improved technical standards and testing and certification systems.
The requirements for the development of biogas technology and equipment are: research and development of dedicated technologies and equipment for the recovery and utilization of landfill gas, improvement of production processes and equipment technologies for large and medium-sized biogas projects, and the formation of relatively comprehensive biogas equipment and construction capabilities.
In addition, the research and development of straw baling and loading equipment, shrub logging and transportation special equipment, various special equipment for biomass solid forming and processing, and focusing on industrialization and standardization work are also involved in the “planning”.
Wind power equipment is mainly made in China
To improve wind power technology research and development capabilities, the "planning" pointed out that during the "Eleventh Five-Year Plan" period, China will continue to promote the large-scale application of mass-produced domestically-made wind turbines, and realize the upgrading of MW-class wind turbines. Based on the preliminary formation of domestic manufacturing equipment capabilities, adopting technology introduction, joint design, independent innovation, etc., mastering integrated manufacturing technologies for wind turbines of 1.5 megawatts and above, and developing offshore wind turbines of 3 megawatts. We will give full play to China's advantages in electromechanical equipment manufacturing, make full use of domestic and international markets, and cultivate wind power equipment supporting parts and components manufacturing industries with high technological level and strong market competitiveness.
In the promotion of solar energy technology equipment and industrial development, "Planning" pointed out that through scientific and technological research, industrialization support, as soon as possible to grasp the high-purity polysilicon materials, production technology and processes to achieve large-scale production. Through pilot project construction, technology introduction and digestion, absorption and innovation will be carried out to master the key technologies of solar thermal power generation.

By accumulating nearly 20 years of experience in plastic machinery production technology and manufacture of hundreds of plastic machines, the company developed and produced lamination and multi-layer laminating combination machine, foaming/EPE&XPE/fluffy material laminating line, extra width & ultra width Lamination Machine, etc. Our technical team has rich experience and high tackling capacity, and the equipment developed by the technical team has stable and reliable quality, excellent index and high flexibility, obtaining the approval and praise of users.

 

Application:

1.      Coating and laminating lightweight, foaming material and other special texture materials.

2.      Transparent film, color film, or semi-transparent films.

3.      Laminating or combination for non-woven fabrics, paper, film, plastic sheet, textiles and a lot of composite material with extra width.

 

FAQ:

Q1: Are you a Manufacture Factory?

No, we are not direct Manufacture Factory, but our factory has been cooperated with Changzhou ZL Machinery since 2000. We are able to offer the most competitive price.

Q2: Installation and commissioning?

We will send our engineer for installation and commissioning. Also, our engineer will train worker until they could produce the product successfully. But, the relevant cost will be paid by you.

 

Customer demanded is our pursuit. If you have any question about this production line, please contact us directly. We will response you in 24 hours. We are willing to take you visit the factory. For any inquiry, please email us directly.  

Lamination Machine

Lamination Machine,PE Laminating Machine,Film Lamination Machine,Multilayer Lamination Machine

Yangzhou Yuyang Nonwoven Machinery Co., Ltd , https://www.yy-machinery.com