Safety Protection Measures for 20-ton Tanker

Compared with ordinary cars, the 20-ton tanker obviously needs to pay attention to safety issues, because the nature of the oil itself is unstable, and it is easy to catch fire. This is especially true when driving. The protection of the tanker is obviously very prone to various accidents, especially for the personnel on the vehicle, the safety precaution is even more important.

Therefore, in order to better ensure personnel safety, oil safety, and vehicle safety, the above safety precautions for tanker trucks must be implemented in a practical manner in order to better bring effective results to everyone.

The first is to prevent the energization of the workers in the 20-ton tanker, because the friction is very easy to static electricity, especially in some areas where the air is relatively dry or in the season may be handling operations, oil or oil When it occurs, static electricity can occur, which in turn can cause oil vapors to come into contact with sparks and cause accidents.

In order to prevent this problem, the staff inside the tanker need to avoid being charged. How to avoid this? That is, workers need to wear specially-made anti-static overalls and anti-static work shoes, so that the human body can achieve a grounding effect, thereby eliminating the generation of frictional static electricity, even the staff’s socks also need special nylon. Socks or conductive materials.

20吨油罐车的安全防护措施

In addition to the above, the 20-ton tanker will also use a special grounding device to prevent static electricity from appearing on the body under various conditions. For example, there will be a special grounding wire and a grounding pipe on the tanker. The grounded iron chain will directly touch the ground to prevent the static electricity generated by the friction of the vehicle. When the vehicle is at a standstill for draining or receiving oil, the grounded iron pipe needs to be inserted into the ground to process the discharged power. With these settings, security can be effectively guaranteed.



Plastic car exterior parts refer to front and rear bumper moulds, fog lamp moulds, and grilles and all plastic accessories, are requesting high quality with hardened steel 1.2738 or Finkl P20 hard steel in order to guarantee specified mould life such as 1000000shots. Plastic injection material is PP or ABS as per customer's requirement. Ceeto company has skilled design engineering team who is able to design plastic car bumper moulds as per part geometry, bumper mould design will be first considered hidden parting line or visible parting line according to DFM analysis and moldflow report.


Car bumper mould making factory


Cnc Workshop to make car bumper mould


Technical information for Car front bumper and rear bumper mould


  1. Design software: Pro-E
  2. Mould cavity: single cavity
  3. Molding material: PP, ABS, PE
  4. Mould cavity and core steel: 1.2738, P20, P20HH, 718H
  5. Hot runner system: Synventive, Yudo, HRS, Moldmaster
  6. Ejection system: Ejector pins, angle lifters
  7. Leadtime: 120 days
  8. Mould life: 500000 shots to 1000000 shots
  9. Mould packing: wooden box


Car bumper mould CNC milling


Ceeto Service Scope to manufacture car bumper mould


  1. Plastic bumper product DFM analysis
  2. Moldflow analysis
  3. Plastic car bumper mould design
  4. Plastic car bumper mould assembly drawing
  5. Plastic car bumper mould machining
  6. Plastic car bumper mould testing via injection molding machine
  7. Plastic car bumper mould packing
  8. Plastic car bumper samples packing
  9. Mould spare parts preparation
  10. We also support you for prototype mould design and manufacture


Plastic car bumper mould


Plastic Car Front Bumper and rear bumper mould test


Before we ship bumper mould to you, we will have bumper mould buy-off in house together with you, and we must make official at least three mould tryouts and 2000 empty cycle for mould to check if mould function is ok in a certain time.


Plastic bumper mould test on machine



Normally, you and we attend the validation procedure together and sign off after checking. What we are checking usually are as follows:

  1. Compatibility with Injection Machine to be used
  2. Is size of the mould ( Leight* width* Height ) correct?
  3. Is weight of the mould is correct?
  4. Are lifting eyebolts fully seated on the mold and not interfering with mold action?
  5. Are all transportation bars installed and in correct color as you request?
  6. Are knock-out holes for mechanical ejection and the layout correct as designed?
  7. Is electric box wired correctly as per injection machine standard?
  8. Are dimensions of locating ring correct?
  9. Is radius and orifice diameter of sprue bush correct?
  10. Are clamping features correct?
  11. Is the mold construction compatible with robot gripping if applicable to take off part?

Plastic bumper mould for car



Plastic car bumper mould material and heat treatment


What we will also inspect mould material and heart treatment as follows:


  1. Is any welding used on mold? Is welding process correct for the steel used?
  2. Have all mold plates been stamped with markings?
  3. Provide the heat treatment certificate and hardness for all applicable mold components
  4. Are moving parts nitrided? Provide nitride certificate.


We warmly welcome you to visit us and send us RFQ, we want to be your part of suppliers and we will do our utmost efforts to make high quality of moulds and products, if you have any doubts about technical points, please don't hesitate to let us know, we are looking forward to hearing from you, thanks a lot.


Automotive Exterior Plastic Injection Mould

Automotive Exterior Plastic Injection Mould,Injection Molding Automotive Parts,Plastic Car Front Bumper,Plastic Car Rear Bumper

Zhejiang Ceeto Molding Technology Co.,Ltd. , https://www.ceetomold.com