The latest kitchen waste search vehicles in developed regions abroad

In foreign countries, the system of waste collection and transportation and disposal in different countries is different, especially in the collection of kitchen waste. Some countries categorize kitchen waste and garden waste into organic waste, which is collected and transported by a compression-type garbage truck. For example, India categorizes kitchen waste, leaves, and cotton as degradable waste. Japan specifically lists kitchen waste, uses special kitchen garbage trucks to collect transshipments, and in Europe, countries treat the kitchen waste in different ways. However, terminal processing is mostly compost or anaerobic digestion. Dirty cars, kitchen garbage trucks, and rear-loading garbage trucks (such as 14).

1. Side-mounted trash lifting device with robot, lightweight design, can be matched with international standard 360 L trash can. The lifting device has a start-up and stop-buffering function, reduces the stress during the operation of the trash can, and prevents the “violent destruction” of the trash can and the vehicle during the operation.

2. The simplified control system achieves the IP67 navigation level safety standard, which is characterized by safety, reliability, computer control and friendly operation interface.

3. Detachable aluminum alloy loading barrel provides good mobility for the vehicle. The loading bucket can be directly loaded with the bagged kitchen waste. The loading bucket can also be quickly removed so that a standard 360 litre can can be attached.

4. After the manual feeding door, you can also choose to install the side sliding door.

5. Lightweight anti-corrosion aluminum alloy body adopts the top-loading method to improve the volumetric utilization of the car body.

6. The body lifting mechanism of the belly, with the top hinged back door, can be quickly unloaded.

7. The rear door adopts the same aluminum alloy as the box material, and adopts the mechanical locking under the high-reliability rear door; at the same time, a standard 240 L trash can bracket can also be installed on the rear door.

8. Meet the emergency stop function of EN418: 1992 mechanical safety standards.

9. The leakproof sealing system conforming to the ECAPB specification meets the protection requirements of high pressure flushing.

10. Parking brake monitoring system and internal locking system to prevent starting the equipment while the vehicle is running.

In Europe, the UK's kitchen waste collection and transportation system is a commercial operation mode and is in a leading position. This article will look at the technical level of European kitchen waste collection vehicles through several typical kitchen waste collection vehicles that are widely used in the United Kingdom.

The larger UK-based Manvik Waste Management Systems Inc. used collections and transfers of kitchen waste and wet waste, using Triberg, Dennis Egger, Giessen Kenuoba, and the Sanitation Company’s Sanitation vehicles.

British Teberge Meite Company The company is a well-known garbage collection vehicle manufacturer in Europe. There are four types of garbage trucks used for garbage collection. They are ABUV kitchen waste collection truck, Toploader biological garbage collection truck, ABP Toploader biological garbage. Collect cars and Kerbside collection vehicles. The ABUV collection vehicle is a small kitchen waste collection vehicle, which is divided into two models of 3.5 t and 7.5 t. It mainly supports the standard trash can of 360 L (); Toploader biological garbage collection vehicle has two sets of trash lifting mechanism, which are installed separately. Side and tail, can be matched with 1 280 L trash can, can meet the collection of kitchen waste in large places such as restaurants, supermarkets, etc., with different models from 7.5 t to 20 t; ABP Toploader bio-waste collection truck is more loaded It is possible to ship dead poultry and livestock; and the Kerbside collection vehicle is the more popular roadside garbage collection vehicle in Europe. The difference between kitchen garbage collection vehicles produced by Terberg is that it is converted into a special garbage bin for kitchen waste between the cabin and the cab, and another strong item is the bin lifting device. This lifting device has become a lot of garbage disposal equipment plants in Europe. The selection of products.

Take ABUV collection vehicle as an example to illustrate the characteristics of Terberg kitchen garbage truck:

5 TÃœV BÃœR ABUV kitchen waste collection trucks product introduction 11. "Quick install" plug-in system to reduce vehicle parking time.

12. The vehicle height warning system prevents the vehicle from traveling when the trash can is in a tipping state.

13. The unique security identification system can prevent unauthorized personnel from operating the equipment.

14. The explosion-proof function of the high-pressure fuel pipe can effectively improve the safety during the operation of the equipment and prolong the service life of the equipment.

15. It can cooperate with digital management, optional trash can weighing system and GPS vehicle location tracking system.

British Dennisig company This company is a world-renowned manufacturer of rear-mounted garbage trucks, with six series of nearly 20 kinds of products. Among them, the Olympus V narrow kitchen waste collection vehicle and the Phoenix Euro V wide kitchen waste collection truck are garbage trucks that collect kitchen waste. Dennis Eiger has partnered with Indian company Hyva India in India.

Olympus Narrows is an enhanced kitchen garbage collection vehicle developed on the basis of Phoenix Wide (see 6), which has effectively improved electrical systems and hydraulic systems.

Take the Olympus V narrow kitchen waste collection vehicle as an example to introduce the performance and characteristics of the car: 1. The round box body is formed by high-strength steel plate bending; using "ship" floor, and under the floor With integrated large-capacity recovery tank, it can effectively prevent the leakage of sewage, and can completely discharge the sewage. There is a separate space for the top material on the top of the box, which can effectively avoid the pollution during loading and unloading.

2. The cabinet is divided into two boxes: the small box is completely independent and is mainly used to collect recyclable garbage; the large box is mainly used to collect incompressible organic garbage.

33. The volume of the obturator is 2.8 m and the loading height is 2.2 m. The compression mechanism guides the compression mechanism and seals with a full length internal seal.

4. The electrical system is equipped with a powerful Canbus network control processor; a control panel is arranged in the cab to implement automatic operation, continuous cycle and manual operation; the filler control buttons are upgraded to improve its waterproof and anti-ash performance; The status of the device can be directly observed through the color LED monitor screen.

5. Use a more slender profile, LED rear taillights (high, low).

6. Meet the latest standards, such as the 2006/42/EC standard, which is the latest safety and health standard within the European Union.

Geesink Norba of the Netherlands This company is Europe's leading waste disposal equipment manufacturer. The products include rear compression type garbage collection vehicles, mobile garbage compression equipment, fixed transfer station equipment, etc. (see 78). Haiwo Machinery (Yangzhou) Co., Ltd. is its only partner in China. The company's mobile kitchen waste collection equipment, has been widely used in Beijing, using pull-arm car dumping transport.

The performance characteristics of the kitchen waste collection equipment of Jisheng Coronba: 1. The separation, suspension and transportation of the carriage, the good maneuverability of the equipment, and the high utilization rate of the vehicle.

2. Using RFID radio technology, with garbage weighing function.

3. Built-in sealing strip, sealing effect is good.

4. Together with other garbage compression equipment to facilitate the collection and classification of garbage.

5. Seamlessly connect with digital remote management system.

The American company of Hell (Hail) has had a history of more than 100 years. In 1973, it established a branch in Europe. Products include front-loading garbage trucks, rear-loading garbage trucks, and side-loading garbage trucks (12). MultiPack, EuroCycler, MultiTask SL, and Rapid Rail Co-Collector can be used to collect food waste. Take the latest EuroCycler product as an example to introduce the kitchen garbage collection vehicle of the company.

The company’s EuroCycler garbage collection truck is a new type of garbage collection vehicle that the company has launched in Europe. It can handle mixed garbage more quickly and efficiently. The car has the following features:

1. The unique double swing type compression mechanism can collect different garbage into two separate garbage bins.

The "bulb-shaped" post-filler can independently and quickly empty trash from different bins.

2. The length of the box reached 7.7 m, the volume reached 25.3 33 m; the volume of the upper box was 11.6 m, and the volume of the lower box 3 was 13.7 m.

3. The modular trash lifting mechanism can be used with the standard trash can from 120 L to 360 L. A detachable garbage loading container can also be used, both of which can be matched with the lifting mechanism; either one container is used and one standard trash can is used.

4. The trash lifting mechanism can be installed on one side or on both sides to improve the efficiency of garbage loading.

In general, most of the kitchen garbage collection vehicles on the European market have the following characteristics:

1. The loading method is mainly based on the trash lifting mechanism, and it is developing in the direction of an automatic robot so that the loading and unloading of the trash can be performed within the driving.

2. Intelligence and digitization are technologies commonly used by European kitchen garbage trucks, including in-flight operating systems, RFID-based RFID systems, in-flight monitoring systems, waste weighing systems, and vehicle positioning and tracking systems.

3. The sub-warehouse technology is a technology commonly used by many European post-loading compression garbage trucks and side-loading garbage trucks to achieve a multi-purpose vehicle. It can either load kitchen waste or recyclable garbage or other garbage.

Sandwhich Panel Forming Machine Line

Sandwich Panel Machine,EPS Sandwich Panel Machine,Roof Roll Forming Machine

Golden Integrity Roll Forming Machine Co., Ltd. , http://www.hbrollformingmachine.com