The main technical properties of the full load, fast and anti-adhesive research mixture are:
1) Ideal grinding efficiency: When the load is added to the rated load of 60 or more, the general tooth surface contact accuracy can be achieved when the number of gear grinding times is not more than 104 times.
2) Good anti-gluing properties: no glue will be produced at full load.
3) Excellent rheological properties: When the gear is in the process of research and development, the research mixture not only plays the role of “cuttingâ€, but also acts as a lubrication protection, and becomes thinner when the pressure is high, so the power consumption is small when the joint is combined.
4) Convenient to use: The research mixture and the metal substrate adhere firmly, do not splash, do not splash into the bearing, easy to clean, non-toxic and harmless to people, and do not corrode equipment.
When possible, the assembled gear box is used as the finishing object, which can eliminate the influence of machining error to the maximum extent and achieve high quality of the transmission. The gear pair without backlash research technology is a specific implementation form of the above ideas. Its characteristics are as follows:
1) It can achieve better transmission quality than the wear-resistant wear-resistant abrasive pump grinding gear. The accuracy of the plane matching and cylinder matching research is more than that of grinding. The gearbox that is conjugated and researched under the use condition will also be superior to the grinding gear.
2) easy to achieve less backlash gear transmission;
3) The required load for research and development is balanced inside the cabinet in the form of internal force Boshan pump manufacturer, no need for peripheral load devices, and its implementation depends on equipment conditions and is easy to implement;
4) With this technology, the hardened gear box can be manufactured without the gear grinding machine under the premise that the gear box has a certain basic precision. Moreover, there is no limit to the size of the gear, and the larger the gear, the better its superiority (large processing equipment and high cost). In the case of other processes unchanged, the process is expected to increase the gearbox transmission accuracy by about one level;
5) When the gear is being combined, if the two gear shafts are artificially made non-parallel by the feeding device, the shaping effect of the gear can be improved, and the influence of the gear bearing deformation on the transmission quality can be reduced.
Cnc Rotary Table
Cnc Rotary Table,Cnc Rotary Side,Rotary Welding Table Cnc,5 Axis Cnc Rotary Table
Dongguan Liyang Intelligent Technology Co., Ltd , https://www.leyomachine.com