There is little probability that polyester will have industry surplus. The packaging industry will become a new big consumer.
Has the domestic polyester industry become yellow tomorrow? The expert's answer is: Although there will be a partial surplus in the domestic polyester market, the probability of oversupply in the industry is very small. As the packaging industry will become the 'big family' of polyester consumption following the textile industry, the over-speed development of the packaging industry in recent years will provide momentum for the continued rapid development of the polyester industry.
Drink packaging is 'big cake'
China's beverage industry has developed rapidly in recent years, with an average annual growth rate of more than 20%. In 2004, China's total soft drink production reached 29,124,300 tons, a year-on-year increase of 22.7%. However, the per capita beverage consumption in China is only 8 liters, which is only 1/5 of the world average, which is 1/24 of the developed countries in Western Europe. This means that China's beverage industry still has huge room for development. Experts predict that the average annual growth rate of the beverage industry in China in the next 5 to 10 years will be above 15%.
The rapid growth of the beverage industry will inevitably drive the rapid development of the beverage packaging industry. PET packaging is widely used in beverage packaging due to its advantages of low price, good transparency and airtightness, high strength, and easy molding. At present, the world's major beverage-producing countries have used more than 60% of the PET beverages in carbonated beverages, fruit juice beverages, tea beverages, and bottled drinking water. China has also increased from 53% in 1997 to 65% in 2001. Up to 70%. In addition, PET bottles are used in China's edible oil packaging in recent years due to their advantages of being non-toxic, odorless, transparent, light weight, good fragrant, non-breakable, good oxygen barrier, and good UV shielding. The category of commodity packaging, pesticides, and washing daily chemicals packaging are widely used, with an average annual increase of more than 20%.
The greatest potential of beer packaging Beer packaging is the most promising market for PET. Compared with traditional glass bottle packaging, PET beer bottle has the advantages of light weight, easy to carry, high strength, good toughness, easy production, not easy to break, no explosion, and saving transportation costs. It is called by the domestic and foreign experts as the 21st century Excellent beer packaging materials. However, beer is easily oxidized, and therefore, the oxygen barrier property and sealing property of packaging materials are required to be high. However, its huge market potential and promising investment return expectation has enabled the world's major PET container manufacturers to invest a lot of manpower and resources in the 1990s to develop processing technologies and technologies for PET beer bottles, and to the end of the last century. At the beginning of the century, large-scale production of PET beer bottles was achieved. In 2001, the use of PET beer bottles in the United States reached 300 million, and PET bottles in European countries such as Britain and Germany accounted for 10% of total beer packaging. Last year, PET beer packaging in South Korea accounted for 40% of total beer packaging.
China's beer production has been maintained at a level of 23 million tons/year since 2000, and last year it exceeded 29.1 million tons. If you calculate by 630ml/bottle, you will need more than 46 billion beer bottles. In the future, as long as 10% use PET bottles, there will be more than 2 billion yuan in market demand. If 50% of PET bottles are used, then PET resin will be consumed annually. Will exceed 1 million tons, the market potential is very alarming.
This huge potential market has been favored by domestic PET packaging companies. After introducing, digesting, and absorbing advanced foreign injection molding equipment and technology, Zhuhai Zhongfu Co., Ltd. has been able to produce three layers of oxygen barrier structures, PET bottles with high barrier, heat resistance, pressure resistance, transparency, and in line with pasteurization process requirements. After its 1600ml family-loaded beer bottle was put on the market, it was very popular with consumers. The PET beer bottles developed by Shanghai Zijiang Enterprise have passed various tests and are recognized by famous domestic beer manufacturers. They can provide 330-640ml products.
Experts anticipate that with the conquering of technical problems and the optimization and improvement of process equipment, PET bottles will be widely used and rapidly growing in the field of beer packaging in China in the next 10 years.
Pharmacy packaging comes from the pharmaceutical packaging mainly refers to packaging medicines and medical equipment bottles, caps, boxes, films, sheets, composite paper, surgical instruments packaging bags, infusion tubes (bags), etc., a few years ago has been PP, PE, PVC Three points in the world, due to soaring prices of PP and PE in the past two years, PVC packaging volume began to increase. However, some characteristics of PVC itself determine that it is impossible to completely replace PP and PE packaging. Compared with the domestic PP, PE price high cargo tight situation, the domestic PET prices in the past two years is relatively low, adequate supply, and its packaging performance is better than PP, PE, PVC packaging is far behind, so in the pharmaceutical packaging Used in large quantities. Although PVC packaging still occupies a large proportion in the field of pharmaceutical packaging, due to the fact that European and other developed countries have forbidden the use of PVC products containing DEHA plasticizers in food and some pharmaceutical packaging applications, the use of PVC in the packaging field will decrease year by year. Instead, it must be PET packaging with high transparency, excellent moisture barrier resistance, easy coloring, non-toxicity, tasteless, good UV resistance, good oxygen barrier properties, easy recycling, etc., enabling PET packaging to come from behind.
Reach stacker is an industrial material handling equipment, which refers to the forward moving wheel type vehicle which carries out loading and unloading, stacking and short distance transportation of the good by pallets. They are usually battery driven and used for transportation of large goods. The electric reach stacker/truck combines the advantages of counterbalance electric forklift and stacking truck, which has the characteristics of environmental protection, energy saving, low noise, high lifting and working in limited space.
Detail features of Zowell reach trucks:
Operation in confined space.
Supper Low and non-slip step makes operation more convenient and safe.
Abundant storage space such as cup holder and file folder,makes the forklift more hunmanized.
Smart Instrument shows all the running status of forklift like the driving wheel position, battery level,error code,etc
Thrust replacement for battery makes it easy to keep maintenance.
Multi-valve operation with hydraulic level can achieve accurate control.
Speed-limiting function for steering,stops the truck turning over when turning.
Double AC Curtis controllers ensure reliable performance.
Using full AC maintenance-free driving motor and lifting motor, maintenance cost is lower.
LED headlight provides more strong light source.
EPAS( Electrical Power Assistance Steering) with small -diameter steering wheel makes it easy
to operate
Floating rear suspension-wheel structure makes it suitable for working in different floor
Detail features of Zowell reach stackers:
1. Front moving function
The gantry can move forward 580cm which can reduce the turning radius of the
truck as well as ensure its running stability.
2. The fork can tilt forward and backward for easy loading and unloading of goods and material, thus improving the transporting stability of the reach truck.
3. This reach truck adopts an original multifunctional handle from Frei, Germany. The operation is comfortable and the functional buttons can realize precise control.
4. Side loading and unloading of storage battery
The side door of the truck and battery cover can be opened, then the battery can
be removed from the side door. So the changing and maintenance of the storage
battery is convenient. There are optional batteries such as FAMM, GS, HOPPECKE,
Trojan.
5. Multipath valve stem control
Different valve stem has different functions such as fork lifting/descending,
fork tilting forward/backward, gantry moving forward/backward. The distribution
of valve stem is compact. The operator can carry out operation with only one
finger, realizing precise control.
6. The ZF driving unit is imported from Germany. It adopts vertical installation. It also delivers superior performance, stability, and reliability.
7. Emergency power-off switch: the power can be rapidly cut off in emergencies to ensure safety.
8. Multifunctional meter can display failure code, electric quantity and some other information. The operators can know the running condition of the truck via the meter.
Reach Truck,Battery Operated Reach Truck,Hyster Reach Truck,Reach Stacker Forklift
Suzhou Pioneer Material Handling Equipment & Technology Co., Ltd , https://www.xianfengforklifts.com