Water treatment equipment hot products recommended

Any substance has its own inherent frequency, and scale is an inorganic salt. The outer shell of general equipment is made of metal materials, and the frequency of oscillation of scale and metal materials is different. The high-frequency oscillation wave released by the SLGP electronic water treatment instrument generates resonance for the scale adhered to the surface of the metal material, ie, crushing and peeling, and is carried out in a table, in and out, so as to achieve the effect of descaling.

To put it succinctly, "water treatment equipment" is to remove some harmful substances that are not needed for production and living through various physical and chemical means. This type of equipment does filtration and purification of water. As social production, life, and water are closely related, the application of water treatment involves a wide range and constitutes a huge industrial application.

The main application areas 1, living facilities areas: all kinds of water as the main medium of the boiler, central air conditioning, heat exchange systems, home central air conditioning, wall hanging boilers.

2, industrial general equipment: air compressor, refrigerator, heat exchanger, cooler and so on.

3. Application in special industries: Anti-fouling, descaling, magnetization, biocide, and algae-killing of water-using equipment for drinking water, food, pharmaceuticals, alcohol, etc., to establish an environment-friendly hydropower construction system.

Here are some water treatment equipments for your reference and choice:

1. Electronic water treatment instrument manufacturer of quality in China:   Shanghai Quante Environmental Engineering Co., Ltd.



Technical Parameters:

Working pressure: ≤1.6MPa

Working temperature: <100°C

Anti-corrosion efficiency: ≥98%

Anti-rust efficiency: ≥98%

Anti-scaling and descaling rate: ≥98%

Resistance loss: ≤5.0KPa

Electric power: 25~500W

Features:

1, the host is fully automatic operation, with fault self-diagnosis function.

2. The installation, use and maintenance are simple and convenient, and the labor intensity is low.

3, no noise, no odor, no need to add any chemical composition, low energy consumption, no pollution.

4, Solid-state silicon crystal circuit design, stable and reliable work, the host service life of up to 15 years.

5, less energy, no pollution, no special management, economic and environmental protection.

6, anti-corrosion rust removal ability, can effectively eliminate the yellow rust water phenomenon, once invested, life-long benefit.

2. Reverse Osmosis Equipment China Manufacturing Network Quality Supplier: Xi'an Tianze Water Treatment Technology Development Co., Ltd.



Features and Benefits:

Advanced technology, reasonable process, compact structure, beautiful appearance, stable operation;

RO system and pure water tank, power pump and valve interlock monitoring, alarm automatic program control (PLC) to ensure the quality of effluent and operational safety;

Unit selection, production and effluent quality are in line with GMP requirements;

Low operating costs, economical; panel touch screen monitoring, alarm control, easy operation.

typical application:

Industrial pure water such as food, medicine, electrical, electronics, petrochemical, etc.

Desalination, brackish water desalination, purification of drinking water;

Ultrapure water preparation;

Desalting, separation and concentration of various aqueous solutions;

Purification and reuse of water and circulating water.

Water production: 0.5m3/h~150m3/h

Water conductivity: 1~50us/cm

Recovery rate: 75%

Operating pressure: 1 ~ 1.5Mpa

3, Water Purifier China Manufacturing Network supplier: Foshan Shunde Xiantai Ultrasonic Engineering Equipment Co., Ltd.



Model: XTA-1132 Series Brand: Xiantai Water Inlet Diameter: Non-standard (mm)

Water production custom specifications: custom work pressure: 100000 (psi)

Model: XTA-1132

Yield: 1

Customs Number: 1293

Category: Wastewater Treatment Plant Treatment Method: Combined Water Treatment

H13 Extrusion Mould

The H13 extrusion mould is a type of tooling used in the extrusion process to produce various shapes and sizes of plastic and metal products. It is made from H13 steel, which is a high-performance tool steel that offers excellent toughness, wear resistance, and thermal conductivity.The H13 extrusion mould is designed to withstand high temperatures and pressures during the extrusion process, making it ideal for use in the production of complex and intricate shapes. It is also highly durable and long-lasting, which means that it can be used for multiple production runs without the need for frequent replacement.The design of the H13 extrusion mould can be customized to meet the specific requirements of each production process. This includes the shape and size of the product being produced, as well as the type of material being used. The mould can be designed to produce a variety of products, including tubes, pipes, profiles, and sheets.In addition to its durability and versatility, the H13 extrusion mould is also easy to maintain and repair. It can be cleaned and serviced quickly and easily, which helps to minimize downtime and ensure that production runs smoothly.Overall, the H13 extrusion mould is an essential tool for the extrusion process, offering high performance, durability, and versatility. Its ability to produce complex shapes and sizes makes it ideal for use in a wide range of industries, including automotive, construction, and packaging.

Mould,Mold Mould,A Mould,Mold

Suzhou Remgar Metal Manufacturer Co.,Ltd. , https://www.rmheatsink.com