What are the characteristics of the intelligent channel gate?

1. The normally open and closed configuration of the clutch of the intelligent channel gate : It is possible to configure the clutch to be normally open or normally closed. In the normally open mode, the clutch is always in the open state. After receiving useful information, the staff member must be in the time of the charter. Pass, timeout will alarm, immediately lock when the illegal passage occurs, can be unlocked after the reset button; in the normally closed mode, the clutch is always in the locked form, when the normal passage, the gate is opened, the staff is in the time of the charter Otherwise, the opportunity is closed again, and various special form requirements are recorded;

2. Configuration of useful time: It is possible to configure the time when the channel gate is opened. It is normal in the time of the charter. If it is not in the time of the charter, the gate will be automatically closed and the record will be exceptional. Useful transit time may be set to 5-255 seconds, the recognition value is 10 seconds;

3, current-limit configuration: When a target does not require staff to pass, after the configuration of the form may wish to prevent staff from passing through the target;

4. The counter is cleared: when a clear instruction is issued, the counter may be cleared.

5. Rotation angle of the gate when opening the gate: When the opening information of a certain target is obtained, the three roller gate will give the passing staff the angle of turning the roller to the target. The angle of configuration is 5-10 degrees, which is 5 degrees.

This plasma polishing machine is specialized in deburring and polishing titanium parts.

During the machining process, titanium parts may produce burrs.

Plasma polishing technology can effectively remove these burrs.

Through plasma polishing, the performance of titanium alloys can be significantly improved.

It can boost the corrosion and wear resistance of titanium alloys. It can also enhance their surface properties.

Improve the surface quality of titanium alloy parts.

Meet more stringent industrial standards and application requirements.

Plasma polishing equipment can be controlled by automation.

Improve polishing efficiency and consistency.

A plasma polishing machine can polish titanium alloy workpieces of any shape or size.