Wishbone suspension |
Wishbone suspension refers to the independent suspension that the wheels oscillate in the transverse plane of the car. According to the number of the crossarms, it can be divided into double wishbone and single wishbone suspensions. The single-arm type has the advantages of simple structure, high roll center, and strong anti-roll ability. However, with the increase of the speed of modern automobiles, an excessively high roll center will cause a large wheel-to-wheel variation when the wheel is beating, an increase in tire wear, and an excessive transfer of the vertical force of the left and right wheels during a sharp turn, resulting in an increase in the camber of the rear wheels. The rear wheel cornering stiffness, resulting in high-speed tail fling serious conditions. Single wishbone independent suspensions are mostly used on rear suspensions, but they are not widely used because they cannot meet the requirements of high speed driving. The double wishbone independent suspension is divided into equal length double wishbone and unequal length double wishbone suspension according to whether the upper and lower arms are equal in length. The double wishbone suspension of equal length can maintain the inclination of the kingpin while the wheel is beating up and down, but the wheelbase changes greatly (similar to the single-arm type), resulting in serious tire wear, which is rarely used. For unequal length double wishbone suspensions, as long as the lengths of the upper and lower crossarms are properly selected and optimized, and through reasonable arrangement, the changes in the wheelbase and front wheel positioning parameters can be within acceptable limits, ensuring the car With good driving stability. The current unequal double wishbone suspensions have been widely used in the front and rear suspensions of cars, and some sports cars and rear wheels of racing cars also use this suspension structure. |
Carbon black is formed by the accumulation of spherical or chain particles with an average diameter of 5~30nm, and the internal microcrystalline structure with a diameter of 3~500nm, which can react with various free radicals.The proportion of carbon black is 1.8~1.9, the proportion of granular carbon black is 0.35~0.4, and the proportion of powdered carbon black is 0.04~0.08.
Carbon black can increase the tensile strength, hardness, tear resistance, wear resistance and other properties of rubber products, it is mainly used as a rubber reinforcing agent, especially for tires.Carbon black's color is extremely black, covering strength is very strong, also is the ideal black pigment.Used to manufacture tires, rubber tubes, conveyor belts and other rubber products as well as ink, dye, paint and other products.
Carbon Black is mainly applied to various rubber products such as tires,rubber overshoes,cable,seal ring,tape etc.Moreover they can be applied to such relevant industries as plastic manufacture.
Carbon Black,Carbon Black Pigment,Carbon Black Powder,Pigment Carbon Black
HENAN JINHE INDUSTRY CO.,LTD , https://www.hncarbonblack.com