(1) Spherical roller bearings, the configuration of the early rolling mill bearings on the rolling mill is different from the present. At that time, two sets of spherical roller bearings were mainly installed side by side on the same roller neck. This configuration basically meets the production conditions at that time, and the rolling speed can reach 600 rpm. However, with the increase of speed, its shortcomings are more and more prominent: short bearing life, large consumption, low precision of finished products, serious wear of the roll neck, large roll yaw, etc.
(2) Four-row cylindrical roller bearing + thrust bearing, the inner diameter of the cylindrical roller bearing is tightly matched with the roller neck, and it can bear radial force. It has large load capacity, high limit speed, high precision, and the inner and outer rings can be separated and can be mutually The advantages of easy replacement, easy processing, low production cost, convenient installation and disassembly, etc.; thrust bearing bearing axial force, the specific structure type can be selected according to the characteristics of the rolling mill. At heavy load and low speed, it is equipped with a thrust roller bearing to withstand the thrust load with a small axial clearance. When the rolling speed is high, it is equipped with angular contact ball bearings, which not only has high speed limit, but also can control the axial play during operation. The rolls are tightly axially guided and can withstand typical axial load forces. This type of bearing configuration not only has long bearing life, high reliability, but also has many advantages such as high precision and easy control of rolling products. Therefore, it is currently the most widely used, and is widely used in wire rod mills, sheet mills, foil mills, and double support rolls. Support rolls for rolling mill cold rolling mills and hot rolling mills.
(3) Four-row tapered roller bearings. Tapered roller bearings can withstand both radial and axial forces. There is no need to configure thrust bearings, so the mainframe is more compact. The inner diameter of the tapered roller bearing is loosely matched with the roll neck. It is very convenient to install and disassemble, but sometimes it will cause sliding creep due to the loose fit. Therefore, the inner diameter is often processed with a spiral oil groove. This type of configuration is still widely used, such as the work rolls of four-high hot rolling mills and cold rolling mills, such as work rolls, blanking machines, and steel beam rolling mills.
Pillar Candle
Pillar candles, just as its name
implies is like cylindrical type of candle.Is a style of Craft candles.Pillar
candle is a common candle,
more popular in western countries.In Europe,every family, whenever festivals, will be at home burn
pillar candle.It also can as wedding pillar candles.Because its burning time is long, usually a few hours, and usually have fragrance,
lit the whole room is full of fragrance.
Pillar Candle,Colorful Pillar Candle,Candle Column,Wedding Pillar Candles
HEBEI GEMMY IMP.& EXP.CO.,LTD , https://www.hbgemmycandle.com