Double Stage Vacuum Insulating Oil Regeneration Purifier/Used Oil Recondition
The principle function of ZYD series vacuum transformer oil purifier/ oil filtration/ oil purification/ oil regeneration/ oil recovery/ oil recondition/ oil reclamation/ oil dehydration/ oil treatment machine, is the removal of water, gasses, impurities and light hydrocarbons from oil.
The operating principle is extremely simple. The system operates under vacuum conditions. The oil is pulled through an electric immersion heater which raises the oil to an optimum temperature. The oil is then forced by atmospheric pressure into the vacuum chamber. There it passes from the Duplex 3D stereo-evaporation device, which can maximum surface area exposure and speed up water removal, the rest solid waste will be filtered by fine filter when the oil coming out of the vacuum chamber. While the oil is exposed to the vacuum, water (free, dissolved, and emulsified), dissolved gasses and air, and other low range volatiles are vaporized out of the oil, and after the last process of fine filtration, leaving a purified and conditioned oil to safe operating standards. The vaporized gasses are pulled off by a rotary vane vacuum pump through a small trap where some of the condensate is collected. The remaining vapors are exhausted to atmosphere.
Technology and advantages of this model:
1: It is for treating various insulating oil, including transformer oil, mutual inductor oil, switch oil.
2: It is widely applied in large scale manufacturing factory, power station and other related industrial fields which will use transformers, especially for over 110 KV transformers.
3: Double stage vacuum system, adopt international advanced duplex stereo-evaporation technology and UK G technology to eliminate the trace water in insulation oil and recover its breakdown voltage greatly.
4: Adopt Germany's 3 UG phase replay, can make the machine working efficaciously and safely at any situations, such as power off, lack of phase, wrong phase position, etc.
5: Equipped with advanced dielectric condensation devices for greatly prolong the oil purifier service life.
6: A trinity of interlocked preventive device is applied for avoid the machine being damaged from any accident automatically.
7: It also can be used as a separate vacuum system for dehydrating oil only, don't need to run all process and can save time and consumption for different request on oil filtration.
8: It can work onsite with the transformer running together.
9: A PLC system can be attached as per customer's requirement.
10: It can be moved easily with equipped steel wheels; It also can be designed for different structure of fully enclosed type and fully enclosed + trailer type for the purpose of outdoor use and indoor use.
11. Various color of this model can be produced just as customer's favor.
Advantages:
1. According to the transformer oil change it is very economic
2. Used transformer oil can be brought up to the equivalent point of new oil
3. Transformer within the moisture, sludge, acids and harmful gases to destroy and the insulation values will be higher than old.
4. Transformer oil life is extended.
5. As a result of the occurrence waste oil and disposal costs would have been zero.
6. Waste oil has been blocked and prevented its negative given for the environment.
Please contact us for more details.
 Double Stage Vacuum Insulating Oil Regeneration Purifier/Used Oil Recondition
The principle function of ZYD series vacuum transformer oil purifier/ oil filtration/ oil purification/ oil regeneration/ oil recovery/ oil recondition/ oil reclamation/ oil dehydration/ oil treatment machine, is the removal of water, gasses, impurities and light hydrocarbons from oil.
The operating principle is extremely simple. The system operates under vacuum conditions. The oil is pulled through an electric immersion heater which raises the oil to an optimum temperature. The oil is then forced by atmospheric pressure into the vacuum chamber. There it passes from the Duplex 3D stereo-evaporation device, which can maximum surface area exposure and speed up water removal, the rest solid waste will be filtered by fine filter when the oil coming out of the vacuum chamber. While the oil is exposed to the vacuum, water (free, dissolved, and emulsified), dissolved gasses and air, and other low range volatiles are vaporized out of the oil, and after the last process of fine filtration, leaving a purified and conditioned oil to safe operating standards. The vaporized gasses are pulled off by a rotary vane vacuum pump through a small trap where some of the condensate is collected. The remaining vapors are exhausted to atmosphere.
Technology and advantages of this model:
1: It is for treating various insulating oil, including transformer oil, mutual inductor oil, switch oil.
2: It is widely applied in large scale manufacturing factory, power station and other related industrial fields which will use transformers, especially for over 110 KV transformers.
3: Double stage vacuum system, adopt international advanced duplex stereo-evaporation technology and UK G technology to eliminate the trace water in insulation oil and recover its breakdown voltage greatly.
4: Adopt Germany's 3 UG phase replay, can make the machine working efficaciously and safely at any situations, such as power off, lack of phase, wrong phase position, etc.
5: Equipped with advanced dielectric condensation devices for greatly prolong the oil purifier service life.
6: A trinity of interlocked preventive device is applied for avoid the machine being damaged from any accident automatically.
7: It also can be used as a separate vacuum system for dehydrating oil only, don't need to run all process and can save time and consumption for different request on oil filtration.
8: It can work onsite with the transformer running together.
9: A PLC system can be attached as per customer's requirement.
10: It can be moved easily with equipped steel wheels; It also can be designed for different structure of fully enclosed type and fully enclosed + trailer type for the purpose of outdoor use and indoor use.
11. Various color of this model can be produced just as customer's favor.
Advantages:
1. According to the transformer oil change it is very economic
2. Used transformer oil can be brought up to the equivalent point of new oil
3. Transformer within the moisture, sludge, acids and harmful gases to destroy and the insulation values will be higher than old.
4. Transformer oil life is extended.
5. As a result of the occurrence waste oil and disposal costs would have been zero.
6. Waste oil has been blocked and prevented its negative given for the environment.
Please contact us for more details.
Â
Pharmaceutical Filtering Washing And Drying Three-in-one Filters
JUD-A series multifunctional two-in-one filter
product description
The two-in-one filter completes the process of stirring, reaction, filtration, cleaning, and liquid removal in a closed container. It has the characteristics of simple structure, simplified process flow, high production efficiency, no cross-contamination, convenient material replacement, and high degree of automation. , Widely used in pharmaceutical, food, dye and other industries.
The filter has two structures:
1. The porous plate filter press cloth or PA filter plate, this structure is simple, convenient to manufacture, economical and practical, see figure (1)
2. Cone filter press cloth or PA filter plate, this structure has a large filtering area and more convenient slag discharge, as shown in Figure (2)
JUD-B series multifunctional three-in-one filter
product description
The JUD-B series multifunctional filtration, washing and drying (three-in-one) machine is a multifunctional solid-liquid separation equipment that integrates filtration, washing, drying, reaction, and automatic slagging.
Scope of application
It is widely used in fine chemicals, pharmaceuticals, petroleum, food, printing and dyeing, medicine and other industries. Due to its unique structure, the equipment has unparalleled characteristics
1. Completely airtight filtration, no leakage, no environmental pollution.
2. Operate under pressure or vacuum to achieve solid-liquid separation. The filter cake is evenly distributed during filtration, and the solid-liquid separation effect is good.
3. The mixing system has stepless speed regulation and multi-station work, which maximizes the slag-holding space during filtration, washes the filter cake thoroughly, and greatly improves the drying efficiency.
4. The slag valve system automatically discharges materials, reducing labor intensity.
5. It is especially suitable for the filtration occasions where the solid content is large, and the liquid and solid phases are recycled and used separately.
6. The filtering adopts horizontal laying filter material, which is clean and thoroughly at one time without residual liquid. The filter material has a unique sealing structure, which makes it easy and quick to replace the filter material.
7 There is a corrosion-resistant three-in-one system made of special materials, which can adapt to a variety of corrosive media.
8. Various processes such as mixing, mixing, beating, reaction, and washing can be practiced in the body, and fully automatic control and operation can be practiced.
Pharmaceutical Filtering Washing And Drying Three-In-One,Filtering Washing Drying Equipments,Three In One Equipments,Filtering Washing And Drying Equipments
Jiangsu Juding Environmental Protection and Energy-saving Equipment Manufacturing Co. , Ltd. , https://www.filter-plant.com