How to use life-saving thrower

The life-saving throwing device is a kind of rescue equipment that throws rescue ropes and life buoys to the target with compressed air as the power. It is mainly used for rescue in marine disasters, high-level air disasters and special occasions.
1. Check the equipment. Before use, check whether the equipment is intact and the surface of the gas cylinder is free of trauma.
2. Prepare equipment. By connecting the hook, the gas cylinder and the rope are firmly connected, the gas cylinder is installed on the ejector, the inflation port is connected with the gas source gas cylinder, and the safety pin is installed.
3. Inflatable. Slightly open the gas cylinder valve to fill the launch gas cylinder to 15-20Mpa.
4. Launch. Pull out the safety pin, at an appropriate angle (usually 35 degrees), and estimate the launch height, trigger the transmitter to launch.

Horizontal Cutting Machine

Box shear machine is horizontal structure, the equipment is driven by hydraulic pressure. Compared with mechanical shear machine, it has the characteristics of small size, light weight, small inertia, low noise,stable movement, flexible operation and large shear section. With the integrated control of hydraulic and electronics, single and continuous action conversion can be implemented, which is simple and convenient to use. In shearing, the material cut does not need manual support, as long as according to the shearing speed, the shearing material can be continuously added to the equipment bin.

1) Independent research and development, independent brand, mature technology.

2) Imported accessories, lower operating costs, higher quality, energy-saving and efficient.

3) Fully enclosed structure, high safety performance, low probability of work-related injuries.

4) Car-mounted mobile customization to meet the needs of changing sites.

5) Integrated installation-free, ready-to-use.

6) PLC control, manual automatic operation, automation free of manual work.

7) Electric power system and diesel system should be operated in a two-pronged way.

8) Cyclic design, long working hours, low human capital requirements.

9) Wide range of application, less restrictions on material delivery, high safety performance.

10) Independent design, long service life, high shear force.

Horizontal Shear, Horizontal Shearing Machine, Container Shear, Horizontal Metal Shear, Horizontal Scrap Shear

Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.ecobriquetter.com