HWS-400 constant temperature and humidity box

HWS-400 constant temperature and humidity box
HWS Series Constant Temperature &Humidity Chamber
I. Application Overview Widely used in medicine, textiles, food processing, biological engineering and other tests and industrial products of various temperature and humidity tests.
HWS-400 constant temperature and humidity box II. Features:
1, using a mirror stainless steel liner, easy to clean around the semi-circular, adjustable shelf spacing.
2, using a double door structure, good insulation properties. The inner door adopts an all-tempered glass door, which opens the outer door and does not affect the temperature inside the box when the inside condition is observed.
3, high-precision, large-capacity humidity generator. Ensure that humidity control occurs quickly, with high accuracy and low fluctuations.
4, the original French "Taikang" closed compressor, configuration delay start. High and low pressure multiple protection.
I.Applications:
It is applicable to humidity testing in the medicinal, spin, food and biology and so on.
II.Feature:
1.Shelves inside the chamber are easy to detach and convenient to wash ,the henght of each shelf can also be adjusted.
2.There is a layer of toughtoned-glass offr with sealing rubber as the inner lay of the outer door for convenient observation of the in-incubator temperature.
3.High precision and large capacity humidity apparatus, which be sure the humidity quickly and low wave.
4.Compressor from French “TaiKang” .which is whole closed .The system was equipped with the function of delay-start and high/low pressure protection
HWS-400 constant temperature and humidity box

three. Technical Parameters / (Speclifucations)

Model Model

HWS-080

HWS-150

HWS-250

HWS-400

Mains voltage

220V, 50Hz

Temperature control range

10~50 °C

Temperature fluctuation

± 0.5 °C

Humidity control range

40~95%RH

Humidity fluctuation

± 5%RH

Consumption power

1400W

1500W

1800W

2250W

Dimensions of the working chamber

400 × 400 × 500mm

500 × 450 × 650mm

600 × 550 × 750mm

600 × 650 × 1000mm

Coating description: Typical multilayer structure; electro-deposit; diamond micro particles inlaid into coating mesh and pores.

Coated ring characteristic: High wear resistance; high thermal scuff resistance, no scuffing up to 290 degree centigrade ring groove temperature; superior mechanical load resistance with good performance under high combustion pressure.

Typical applications: Top ring of Euro V & above diesel engine adopted; taper or step land oil control ring with high contact pressure recommended.

Chrome Diamond Coating Piston Ring

Chrome Diamond Coating Piston Ring,Diamond Coating Piston Ring,Coating Art Piston Rings,Chrome Piston Ring

ASIMCO Shuanghuan Piston Ring (Yizheng) Co., Ltd. , http://www.cypr-pistonring.com