Jianghuai Guowujunling 3815 wheelbase 8 square fuel truck Chusheng brand CSC5091GJYJH5 type fuel truck
Jianghuai Junling 2049 wide body cab, 3815 wheelbase, Weichai 130 hp, 6-speed gearbox, 215/75R17.5 steel wire tires, moving, air conditioning, front plate, ABS, speed limit, driving recorder, exhaust Brake, retarder. 4 tons of front axle and 6.5 tons of rear axle.
ã€The main technical parameters】
Product trademark Chusheng
Announcement batch 287
Product Name CSC5091GJYJH5 Fuel Truck
Product No. ZMD5G58F01P
Total mass (Kg) 9300
Tank volume (m3) 7
Rated load mass (Kg) 4670
Dimensions (mm) 6900×2100×2700
Curing quality (Kg) 4435
Cargo size (mm) × ×
Rated passenger (person)
Quasi-trailer total mass (Kg)
Number of passengers in the cab (person) 3
Load mass utilization factor
Approach angle / departure angle (°) 25.9/14
Front overhang / rear overhang (mm) 1085/2000
Number of axes 2
Wheelbase (mm) 3815, 3365
Axle load (Kg) 2900/6400
Maximum speed (Km/h) 80
Other 1, the car is suitable for the transportation of dangerous goods. Transport medium: gasoline, category number: 3, density: 700 kg / cubic meter; tank effective volume 7 cubic meters; maximum 8.6 square, tank dimensions (length × long axis × short axis) (mm): 1 refueling The machine side is mounted on the left or right side of the frame: 4800×1850×1180, 2 the tanker is installed in the front of the tank: 4800 (the length of the tanker is 800)×2000×1300; the upper part of the tank is equipped with a folding guardrail. Install the ladder structure. 2. The side protection is cold-formed steel/Q235 and bolted. The rear protection is made of cold-formed steel/Q235, welded, with a section height of 300mm, a section width of 50mm, and a lower edge of 500mm from the ground. Tanker model and manufacturer: BL1111Z/Zhuhai Beiling Fuel Equipment Co., Ltd. Zhongshan Branch, HS1812B/Tokent Hengshan Technology (Guangzhou) Co., Ltd., SKES-1112/Henghe Jiahua Technology Co., Ltd. (Shanghai Bolai Machinery) Ltd.),SK20QF-111A, SK20QF-222A/Zhengzhou Sanjin Petroleum Equipment Manufacturing Co., Ltd., CS20D1110F/Zhengxing Technology Co., Ltd., JSK-70B1121CZ, JSK-70B1121C, JSK45B1121C/Sheng Enjia Lijia (Beijing) Petrochemical Equipment Co., Ltd., ZH6444/Foshan Zhongze Electromechanical Technology Co., Ltd. 3. Only the muffler front, speed limit device, front wheel disc brake and radial tire chassis are selected; the vehicle is equipped with a satellite positioning function driving recorder. ABS model/manufacturer: CM4XL-4S/4M/Guangzhou Kemi Automotive Electronic Control Technology Co., Ltd.
[Chassis technical parameters]
Chassis type HFC1091P91K5C5ZV
Chassis Name Car Chassis (Class 2)
Trademark name Jianghuai
Production enterprise Anhui Jianghuai Automobile Co., Ltd.
Dimensions (mm) 6810,6360×2049×2285
Number of tires 6
Approach angle / departure angle (°) 25.9/18.5
Tire size 215/75R17.5
Leaf spring number 8/6+6
Front track (mm) 1700
Fuel type diesel
Rear track (mm) 1600
Emission standard GB17691-2005 country V, GB3847-2005
Engine type engine manufacturer
Displacement (ml) power (Kw)
WP3Q130E50 Weichai Power Yangzhou Diesel Engine Co., Ltd. 2970 96
Silicone mould is a special mold for making crafts. According to performance, the raw materials of glue can be divided into ordinary silicone and weather silicone. The characteristics of silicone are high temperature resistance, corrosion resistance, strong tear resistance, high simulation precision, and it is used to make various handicrafts mold.
Mold should be made in time after the silicone is matched. Pour the glue on the highest part of the mold in a trickle, let it flow naturally, brush it in place with an oil paintbrush where the flow is not in place, if it is a piece of silicone, not only fill the entire product, but also brush the glue evenly. Each product should be brushed with at least three layers of silicone. The thickness of each layer of silicone is 1mm. In the process of brushing the silicone, each layer is required to be cured before the other layer can be brushed. When brushing the third layer, add one layer on top of the second layer. The thickness of the silica gel part of the whole mold is controlled in 3-4mm according to the different requirements of the size of the product, and the width is not greater than 60 mm of the product width. The time for the silicone to set is 20 minutes.
Silicone Injection Molding, Moulding Silicone, Rubber Molds, Rubber Mold Making
Sung Precision Mould & Plastic Co., Ltd. , https://www.dginjectionmolding.com