Single Roller Hotel Flatwork Ironer Machine for Bedsheets/Table Clothes Ironer

YPAI-YPAIII ironing machine:

Ironing machine, Industrial ironing machine, Commercial ironing machine, Automatic ironing machine, Ironing machine for bed sheets, Flatwork ironer, Flatwork ironing machine, Roll ironing machine, Industrial ironing machine for bed sheet, Marine ironing machine

1. Automatic ironing machine, horizontal structure, easy to operate and high-quality ironing effect...

2. Steam or electrical heating.

3. Ironing for various of bed sheets, towel, tablecloth, curtain or liens which are usually used in hotel, restaurant, school, hospital, counterpane factory and laundry house, etc.

4. According to the fabric width, the roller length of industrial ironing machine can be 1800mm, 2500mm, 2800mm and 3000mm, also we can make the length less than 1800mm as per your requirements. And the roller can be single, double and three. Surely, the ironing speed of double rollers and three rollers ironing machine is quicker than that of single roller ironing machine

5. The precise structure of double chests, springs and heating proof felt ensure the rollers to keep enough electricity and spring cushion, which creates the surface well-touched. Unique lever balance pressure device and the cylinder pressure adjust system on both sides. Unique whirl steam flow heating system for the connecting plate improves the ironing result.

6. Reliable and safe operation system
With a finger guard, once operator touches the plate the machine will stop immediately.
Anti-curliness device can prevent the fabrics curling in the chests.
With steam and compressed air control system, once the pressure is too low the system will alarm.
Many emergency stop button fixed on the ironer. Any buttoned pressed, the ironer will stop to run.
The pneumatic system can raise and lock up the rollers to prevent the fabrics and the proof felt damaged when the machine stops running in case of no power.
A big touch screen controller with interactive interface on the machine is easy for operator to program according to different requirements.

7. High efficiency and Low energy consumption
The chests have a large angle heating surface, which can improve the heating efficiency.
The ironer adopts a single drive motor which can save energy. The frequency converter system can adjust the ironing speed from 8~40 m/min with the change of temperature, type of fabrics, moisture, etc.
The chests adopt a unique heating chamber recycle system with many strips on double sides. Steam can flow in the chamber with high efficiency. In addition, the chests are covered by thermal insulators to reduce heat losses.

8. With CE and ISO9001 certificates. YPAI-YPAIII ironing machine:

Ironing machine, Industrial ironing machine, Commercial ironing machine, Automatic ironing machine, Ironing machine for bed sheets, Flatwork ironer, Flatwork ironing machine, Roll ironing machine, Industrial ironing machine for bed sheet, Marine ironing machine

1. Automatic ironing machine, horizontal structure, easy to operate and high-quality ironing effect...

2. Steam or electrical heating.

3. Ironing for various of bed sheets, towel, tablecloth, curtain or liens which are usually used in hotel, restaurant, school, hospital, counterpane factory and laundry house, etc.

4. According to the fabric width, the roller length of industrial ironing machine can be 1800mm, 2500mm, 2800mm and 3000mm, also we can make the length less than 1800mm as per your requirements. And the roller can be single, double and three. Surely, the ironing speed of double rollers and three rollers ironing machine is quicker than that of single roller ironing machine

5. The precise structure of double chests, springs and heating proof felt ensure the rollers to keep enough electricity and spring cushion, which creates the surface well-touched. Unique lever balance pressure device and the cylinder pressure adjust system on both sides. Unique whirl steam flow heating system for the connecting plate improves the ironing result.

6. Reliable and safe operation system
With a finger guard, once operator touches the plate the machine will stop immediately.
Anti-curliness device can prevent the fabrics curling in the chests.
With steam and compressed air control system, once the pressure is too low the system will alarm.
Many emergency stop button fixed on the ironer. Any buttoned pressed, the ironer will stop to run.
The pneumatic system can raise and lock up the rollers to prevent the fabrics and the proof felt damaged when the machine stops running in case of no power.
A big touch screen controller with interactive interface on the machine is easy for operator to program according to different requirements.

7. High efficiency and Low energy consumption
The chests have a large angle heating surface, which can improve the heating efficiency.
The ironer adopts a single drive motor which can save energy. The frequency converter system can adjust the ironing speed from 8~40 m/min with the change of temperature, type of fabrics, moisture, etc.
The chests adopt a unique heating chamber recycle system with many strips on double sides. Steam can flow in the chamber with high efficiency. In addition, the chests are covered by thermal insulators to reduce heat losses.

8. With CE and ISO9001 certificates.

Hammerhead Tower Crane:

Construction Machinery Tower Crane is a new-style elevating machinery specially designed for the construction of tall buildings and equipment installation, is a type of self-raising multi-purpose tower crane equipped with level arm support, and it allows trolley derricking and upper slewing.

TYPE		QTZ63C (TC5211)	QTZ63D (TC5510)	QTZ63E (TC5610)	QTZ63 (TC5013)
Rated lifting moment  (KN.m)		630	630	630	630
Working range  (m)		3~52	3~55	3~56	3~50
Load	Tip load (t)	1.1	1	1	1.3
	Max load (t)	6	6	6	6
Lifting height	Free standing (m)	41	41	40	40
	Adhesion type  (m)	120	120	120	120
Lifting speed	Double rates (m/min)	80/40/7	80/40/7	80/40/7	80/40/7
	Fourfold rates (m/min)	38.5/19.2/3.5	38.5/19.2/3.5	38.5/19.2/3.5	38.5/19.2/3.5
Min stable fall speed (m/min)		≤7	≤7	≤7	≤7
Slewing speed (m/min)		0-0.62	0-0.62	0-0.62	0-0.62
Trolley-travelling speed (m/min)		20/40	20/40	20/40	20/40
Jacking speed (m/min)		0.5	0.5	0.5	0.5
Balance weight (t)		9.18	10.7	/	/
Upper chord of jib (20#)		Φ102*8	Φ102*8	Φ102*8	Φ102*8
Mast section size (mm)		1611*1611*2500	1611*1611*2500	1835*1835*2500	1835*1835*2500
Mast section material  (Q235B)		∠160*16& ∠160*14	∠160*16	â–¡135*135*10	∠160*16

Application Area:

Hammerhead Tower Crane have competitive price and excellent quality, suitable for all kinds of construction project and can work under all kinds of work condition.
If you have any questions, please contact with us directly. Hammerhead Tower Crane are produced with High Quality and Good Appearance. Welcome you can visit our Factory. For inqury, Please send mail directly to us.

Hammerhead Tower Crane

Hammerhead Crane,Stationary Hammerhead Tower Crane,Hammerhead Widely Luffing Tower Crane,Hammerhead Tower Crane

Jinan East Machinery Co.,Ltd. , https://www.jneastmach.com