SS316L Stainless Steel Clamped Direct Way Butterfly Valve
| Name | Ss316L Stainless Steel Clamped Direct Way Butterfly Valve |
| Eye Ring Material | Rubber |
| Body material | Grey Iron |
| Disc Material | Grey Iron |
| Stem Material | Carbon steel |
| Enclose (water) | 1.1Mpa |
| Nominal Pressure | 1.0Mpa |
| Product Keywords | valves and fittings,valve company,valve ball manufacturer |
| Medium | Steam, water |
| Working Temprature | <120ºC |
| Strength (water) | 1.5Mpa |
2. Pressure loss
Too much pressure loss will bring increased cost of correlative energy
Butterfly valve have flow characteristics three times better than globe valve, and about 75%
Of a same size gate valve
3. Multi-Function
Butterfly valve can be used for on/off service and throttling, They are superior in Multi-function
As compared to gate or globe valves. Butterfly valve can be widely used in chemical field due
To trim options and choice of elastomeric liner.
4. Weight
Butterfly valve have feature of light in weight and small in size, for example, weight and size of
A 10'' butterfly valve are 1/9 and 1/6 of a 10'' gate valve. So butterfly valve is easy to install and
Save cost of piping system.
5. Bubble Tight
Butterfly valve with resilient seat design can be bubble tight as compared to metal seated gate
Or globe valves.
6. Easy of operation
Butterfly valve offer 90-degree open to close.
7. Butterfly valves is approximate 35-40% cost of a same size gate valve. Also low
Installed cost than gate valve.
8. Maintenance
Properly installed butterfly valves are self cleaning and are less susceptible to failure due to
Trash material in pipe.
9. Delivery Time: 25 days after order conformed.
10. Standard: EN, MSS, API, AWWA, BS
11. Operation: Level operation
12. Body: Cast iron, stainless steel 304/316, aluminum bronze
13. Painting: PTFE coating, nylon painting
14. Stem: CS, SS416, SS410, SS304, SS431
15. Seat: NBR, EPDM, PTFE
16. Pressure: PN10, PN16
17. Size: 2''-24''
18. Packaging: Export poly wooden cases, or as per customers' requirements
19. Payment: By L/C, T/T and D/P
Quality assurance:
1. Vinner is equiped with world advanced computer driving production lines
2. Whole set of pure water processor line featured with RO anti-saturation and advanced testing devices
3. Manufactured in Class 100,000 Cleanroom
Technical Specifications
| Valve Body Material: Â | 1.4404/1.4301, SS304/SS316L |
| Seal Material: | EPDM (standard) FPM/SILICON/NBR, FDA177.2600Â |
| Mex working pressure: | 10Bar |
| Max. Working Temperature: | -10 ºC to120 ºC(EPDM Seal) |
| Availably  size: |  1"-6",DN25-DN150 |
| Availably connection: | Clamp / weld / thread/ weld thread/ flange |
| Availably standard: | 3A/DIN/SMS/RJT/ISO/IDF |
| Operated: | Manual,Pneumatic, Electric |
| Control: | Sensor, C-TOP, C-top controller(AS-I) |
| Certificate: | ISO, PED/97/23/EC, FDA.177.2600 |
| Handle application: | Two-position handle, three-position handle, four-position pull handle, multi-position plastic handle and multi-position stainless steel handle |
| Application scope:  | Dairy,food, beverage, pharmacy, cosmetic, Chemical, etc |
| Packaging Details: | Bubble pack for each valve. Outside packing are carton or plywood cases. Or as per the request of customers. |
| Delivery d etails: | Usually within 20 days after receiving T/T down payment. Â |
Operating principles
The butterfly valves can be operated automatically through actuator or manually with the handle.
The handle blocks the valve in the "open" or "closed" position, certainly there are the other position available.
The actuator push piston of axial movement into 90 degree so that it controls butterfly vavle.
Various configuration of Diaphragm valve
Pneumatic Operation
1. Didaphragm valve with Positioner/Process Controller(IL-TOP)
2. Diaphragm valve with Control Unit(C-Top)
3. Valve position Regulator
4. Position Sensor Module
5. Stainless steel actuator
6. Plastic Actuator
Electric Operation
7. Electric Diaphragm valve
Manual Operation
8. Plastic Handle
9. Stainless steel handle
We will give you a reply within 24 hours after receiving your inquiry.
Packing & Delivery:
Delivery Details : 3-5 working day for sample, 2-7 working day for small products, 15-30 working day for mass products.Â
Packaging Details:shrink wrapped - carton - plywood case or according to customers' requirement.
Usually we ship your order by sea or by air...
We'll tell you the tracking number once your order has been sent
We accept T/T Bank transfer, L/C, Western Union, Moneygram, Paypal
FAQ:
1. Are you a factory or the trading company?
Q:We are manufacturing factory and we have the export licensed
2. Do you have any guarantee on the quality of your valves?
 Q:Quality assurance for more than one year
3.What is you delivery time?
Q:A week for sample; 15-30days for mass production.
4.Which port are you shipping?
Q:Ningbo or Shanghai Port
5.Can we print the LOGO on products?
Yes, and we support the OEM.
6.Do you have any certification?
Q:Yes, we have 12Â patents for the products.
7.Why can we trust that you will deliver goods after remittance?
Q:We are the honest merchant.and you will get the assurance from Made-in-china if you choose us,and  our factory has been inspected by SGS .
8.Can I get some samples?
Q:Yes .Free samples will be sent to you by express mail
9.May I visit your factory?
Q:Sure,welcome any time. We can also pick you up at airport and station.
10.We are always ready for providing the sample and producing some small orders, in order to meet the business well.
Q:We are always ready to hear from you.
| Name | Ss316L Stainless Steel Clamped Direct Way Butterfly Valve |
| Eye Ring Material | Rubber |
| Body material | Grey Iron |
| Disc Material | Grey Iron |
| Stem Material | Carbon steel |
| Enclose (water) | 1.1Mpa |
| Nominal Pressure | 1.0Mpa |
| Product Keywords | valves and fittings,valve company,valve ball manufacturer |
| Medium | Steam, water |
| Working Temprature | <120ºC |
| Strength (water) | 1.5Mpa |
2. Pressure loss
Too much pressure loss will bring increased cost of correlative energy
Butterfly valve have flow characteristics three times better than globe valve, and about 75%
Of a same size gate valve
3. Multi-Function
Butterfly valve can be used for on/off service and throttling, They are superior in Multi-function
As compared to gate or globe valves. Butterfly valve can be widely used in chemical field due
To trim options and choice of elastomeric liner.
4. Weight
Butterfly valve have feature of light in weight and small in size, for example, weight and size of
A 10'' butterfly valve are 1/9 and 1/6 of a 10'' gate valve. So butterfly valve is easy to install and
Save cost of piping system.
5. Bubble Tight
Butterfly valve with resilient seat design can be bubble tight as compared to metal seated gate
Or globe valves.
6. Easy of operation
Butterfly valve offer 90-degree open to close.
7. Butterfly valves is approximate 35-40% cost of a same size gate valve. Also low
Installed cost than gate valve.
8. Maintenance
Properly installed butterfly valves are self cleaning and are less susceptible to failure due to
Trash material in pipe.
9. Delivery Time: 25 days after order conformed.
10. Standard: EN, MSS, API, AWWA, BS
11. Operation: Level operation
12. Body: Cast iron, stainless steel 304/316, aluminum bronze
13. Painting: PTFE coating, nylon painting
14. Stem: CS, SS416, SS410, SS304, SS431
15. Seat: NBR, EPDM, PTFE
16. Pressure: PN10, PN16
17. Size: 2''-24''
18. Packaging: Export poly wooden cases, or as per customers' requirements
19. Payment: By L/C, T/T and D/P
Quality assurance:
1. Vinner is equiped with world advanced computer driving production lines
2. Whole set of pure water processor line featured with RO anti-saturation and advanced testing devices
3. Manufactured in Class 100,000 Cleanroom
Technical Specifications
| Valve Body Material: Â | 1.4404/1.4301, SS304/SS316L |
| Seal Material: | EPDM (standard) FPM/SILICON/NBR, FDA177.2600Â |
| Mex working pressure: | 10Bar |
| Max. Working Temperature: | -10 ºC to120 ºC(EPDM Seal) |
| Availably  size: |  1"-6",DN25-DN150 |
| Availably connection: | Clamp / weld / thread/ weld thread/ flange |
| Availably standard: | 3A/DIN/SMS/RJT/ISO/IDF |
| Operated: | Manual,Pneumatic, Electric |
| Control: | Sensor, C-TOP, C-top controller(AS-I) |
| Certificate: | ISO, PED/97/23/EC, FDA.177.2600 |
| Handle application: | Two-position handle, three-position handle, four-position pull handle, multi-position plastic handle and multi-position stainless steel handle |
| Application scope:  | Dairy,food, beverage, pharmacy, cosmetic, Chemical, etc |
| Packaging Details: | Bubble pack for each valve. Outside packing are carton or plywood cases. Or as per the request of customers. |
| Delivery d etails: | Usually within 20 days after receiving T/T down payment. Â |
Operating principles
The butterfly valves can be operated automatically through actuator or manually with the handle.
The handle blocks the valve in the "open" or "closed" position, certainly there are the other position available.
The actuator push piston of axial movement into 90 degree so that it controls butterfly vavle.
Various configuration of Diaphragm valve
Pneumatic Operation
1. Didaphragm valve with Positioner/Process Controller(IL-TOP)
2. Diaphragm valve with Control Unit(C-Top)
3. Valve position Regulator
4. Position Sensor Module
5. Stainless steel actuator
6. Plastic Actuator
Electric Operation
7. Electric Diaphragm valve
Manual Operation
8. Plastic Handle
9. Stainless steel handle
We will give you a reply within 24 hours after receiving your inquiry.
Packing & Delivery:
Delivery Details : 3-5 working day for sample, 2-7 working day for small products, 15-30 working day for mass products.Â
Packaging Details:shrink wrapped - carton - plywood case or according to customers' requirement.
Usually we ship your order by sea or by air...
We'll tell you the tracking number once your order has been sent
We accept T/T Bank transfer, L/C, Western Union, Moneygram, Paypal
FAQ:
1. Are you a factory or the trading company?
Q:We are manufacturing factory and we have the export licensed
2. Do you have any guarantee on the quality of your valves?
 Q:Quality assurance for more than one year
3.What is you delivery time?
Q:A week for sample; 15-30days for mass production.
4.Which port are you shipping?
Q:Ningbo or Shanghai Port
5.Can we print the LOGO on products?
Yes, and we support the OEM.
6.Do you have any certification?
Q:Yes, we have 12Â patents for the products.
7.Why can we trust that you will deliver goods after remittance?
Q:We are the honest merchant.and you will get the assurance from Made-in-china if you choose us,and  our factory has been inspected by SGS .
8.Can I get some samples?
Q:Yes .Free samples will be sent to you by express mail
9.May I visit your factory?
Q:Sure,welcome any time. We can also pick you up at airport and station.
10.We are always ready for providing the sample and producing some small orders, in order to meet the business well.
Q:We are always ready to hear from you.
Cable Ladder Roll Forming Machine is used to produce cable ladder which light weight, low cost, unique shape, easy installation, heat dissipation, good ventilation, etc. We guarantees that the Cable Tray Machine provided is brand new, advanced, mature, complete and safe, and the technical performance and function of the equipment meet the requirements of technical conditions. Machine. Taigong Roll Forming Machine factory is a very trustworthy company, which do machine for nearly 20years. Choose us for once, choose for good.
Cable Ladder Roll Forming Machine
Cable Ladder Roll Forming Machine,Cable Ladder Machine,Steel Ladder Cable Tray Machine,Ladder Type Cable Tray Making Machine
Hebei Taigong Roll Forming Machinery Co., Ltd. , http://www.tgrollformingmachine.com