Working principle and technical index of slagging characteristic tester

JHJZ-2 type slagging tester is a special instrument developed according to the technical requirements stipulated by the national standard "Measurement method of coal slagging property" (GB1572-89). It is mainly used to determine the difficulty of slagging coal during gasification or combustion. Widely used in department laboratories coal, metallurgy, electric power, particularly in coal-fired units, boiler units, if any, can be measured in advance slagging resistance, in order to guide the scene matching coal, slagging.

working principle

The coal is made into a sample with a particle size of 3 -6 mm, placed in the gasification chamber of the instrument, ignited with charcoal of the same particle size, and gasified or burned under a certain blast strength, after the sample is burned out. The blast is stopped. After cooling, the carbon residue is taken out and weighed. After passing through a vibrating screen of 6 mm sieve hole, the percentage of the carbon residue larger than 6 mm is calculated as the slagging rate, thereby evaluating the slagging property of the coal.

Technical indicators

1. It should cooperate with blower: air volume ≥ 12m 3 /h wind pressure ≥ 1000mmHg;
2, coal sample size: 3 -6mm
3, the amount of loading 400cm

Precautions and spare parts

1. The flue gas chamber, air chamber and exhaust pipe should be cleaned regularly.
2, pay attention to rust prevention when not in use frequently.
3. The gasification chamber is a wearing part, and the instrument does not have spare parts.

EVA Traction Pad

EVA Traction Pad is the tail pad to be sticked on the surfboard. It comes with center arch and kick tail, which allow surfers to control the direction and stability when surfing in the sea.

The design of surfboard traction pad can be in one piece, two pieces, or three pieces basically. The standard the classical texture for traction pad would be diamond like texture, as it can provide the stronger grip among all of them.

EVA Traction Pad
There are two ways to make the logo on the traction pad, one is PVC logo, the other one is EVA color connect logo.
EVA Traction Pad
PVC logo is a very simple idea, just make a PVC logo based on the design and insert it into the traction pad. One advantage of PVC logo is that it can be more detailed and complicated than the EVA color connect logo. And it can be repeatly used on other pads without any more setup tooling charge.

The EVA color connect logo is made along with the pad itself. Unlike the PVC logo, it is also EVA material same as pad, and also shows with the texture. The design of this logo can not be too detailed and small, it needs to be larger and simpler so that we can use the different color EVA material to connect them.

Eva Traction Pad,Non-Skip Traction Pad,Traction Pad,Surfboard Tail Pads,Grip Tail Pad,Eva Tail Pad

Huizhou City Melors Plastic Products Co., Limited , https://www.melorsfloor.com