ISO21287 Standard Advu Series Pneumatic Air Cylinder
  1.Smart appearance,save the space
 2.Proximity transducer is flush mounted inside sensor groove,prevent sensor from mechanical damage
 3.Extra buffering ring at terminal place can absorb residual energy of movement at a high speed and machine circulation
 4.Good replacement for the FESTO same type.
Note:ADVU series Cylinder With 100mm bore size is under designing,not available this time.ISO21287 standard ADVU series Pneumatic Air Cylinder
Features:
1) Bore size: 16mm, 20mm, 25mm, 32mm, 40mm, 50mm, 63mm, 80mm, and 100mm
2) Acting type:Â double acting or single acting
3) Material: aluminum
4) Seals: NBR
5) Rod end thread type: internal thread, external thread or NO thread
6) Working pressure:0.1~0.9MPa
7) Working temperature: 0~70C
8) Port connection size: M5, G1/8", G1/4", G3/8"
| Bore(mm) | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | |
| Action | Double acting, single rod/double rod | |||||||||
| Fluid | Filtered compressed air | |||||||||
| Ensured Pressure Resistance | 1.5MPa | |||||||||
| Operating pressure range |
ADVU - -P-A | 0.12~1.0MPa | 0.1~1.0MPa | 0.08~1.0MPa | 0.06~1.0MPa | |||||
| ADVU - -P-A-S2 | 0.13~1.0MPa | 0.12~1.0MPa | 0.1~1.0MPa | 0.8~1.0MPa | ||||||
| Ambient and fluid temperature | -20~80 (No freezing) | |||||||||
| Port size | M5 | G1/8" | G1/4" | |||||||
| Piston rod thread | Female thread | M4 | M5 | M6 | M8 | M10 | M12 | |||
| Male thread | M8 | M10×1.25 | M12×1.25 | M16×1.5 | M20×1.5 | |||||
| Cushion | Rubber bumper | |||||||||
Other Compact/Thin Cylinders are also available for you:
SDA series Thin Cylinder
CQ2 series Compact Cylinder
Our company also can provide other pneumatic cylinders as below,
1. ISO Standard cylinder: DNC(ISO 6431&VDMA24562),DNG(ISO 15552),SI(ISO 6431),MA(ISO 6432)
2.Standard cylinder:SC/SU,MB,CA1
3.Mini cylinder:MA,MAL,CJ2,CM2,CJP
4.Double-shaft cylinder:TN,CXS
5.Free installation cylinder:CU
6.Slide bearing cylinder:STM
7.Three-shaft cylinder:MGP
8.Stopper cylinder:RSQ
9.Clamp cylinder:XCK
10.Rotary cylinder:MSQ
11.Rodless cylinder:CY1
12.Air gripper:XHZ2/XHC2,XHL2,XHT2
More information and details,you can contact us and visit our website.
If you have the nonstandard products want to design,don't hesitate to contact us.
Â
Â
  1.Smart appearance,save the space
 2.Proximity transducer is flush mounted inside sensor groove,prevent sensor from mechanical damage
 3.Extra buffering ring at terminal place can absorb residual energy of movement at a high speed and machine circulation
 4.Good replacement for the FESTO same type.
Note:ADVU series Cylinder With 100mm bore size is under designing,not available this time.ISO21287 standard ADVU series Pneumatic Air Cylinder
Features:
1) Bore size: 16mm, 20mm, 25mm, 32mm, 40mm, 50mm, 63mm, 80mm, and 100mm
2) Acting type:Â double acting or single acting
3) Material: aluminum
4) Seals: NBR
5) Rod end thread type: internal thread, external thread or NO thread
6) Working pressure:0.1~0.9MPa
7) Working temperature: 0~70C
8) Port connection size: M5, G1/8", G1/4", G3/8"
| Bore(mm) | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | |
| Action | Double acting, single rod/double rod | |||||||||
| Fluid | Filtered compressed air | |||||||||
| Ensured Pressure Resistance | 1.5MPa | |||||||||
| Operating pressure range |
ADVU - -P-A | 0.12~1.0MPa | 0.1~1.0MPa | 0.08~1.0MPa | 0.06~1.0MPa | |||||
| ADVU - -P-A-S2 | 0.13~1.0MPa | 0.12~1.0MPa | 0.1~1.0MPa | 0.8~1.0MPa | ||||||
| Ambient and fluid temperature | -20~80 (No freezing) | |||||||||
| Port size | M5 | G1/8" | G1/4" | |||||||
| Piston rod thread | Female thread | M4 | M5 | M6 | M8 | M10 | M12 | |||
| Male thread | M8 | M10×1.25 | M12×1.25 | M16×1.5 | M20×1.5 | |||||
| Cushion | Rubber bumper | |||||||||
Other Compact/Thin Cylinders are also available for you:
SDA series Thin Cylinder
CQ2 series Compact Cylinder
Our company also can provide other pneumatic cylinders as below,
1. ISO Standard cylinder: DNC(ISO 6431&VDMA24562),DNG(ISO 15552),SI(ISO 6431),MA(ISO 6432)
2.Standard cylinder:SC/SU,MB,CA1
3.Mini cylinder:MA,MAL,CJ2,CM2,CJP
4.Double-shaft cylinder:TN,CXS
5.Free installation cylinder:CU
6.Slide bearing cylinder:STM
7.Three-shaft cylinder:MGP
8.Stopper cylinder:RSQ
9.Clamp cylinder:XCK
10.Rotary cylinder:MSQ
11.Rodless cylinder:CY1
12.Air gripper:XHZ2/XHC2,XHL2,XHT2
More information and details,you can contact us and visit our website.
If you have the nonstandard products want to design,don't hesitate to contact us.
Â
Â
The number of slots on each side of T-slot industial aluminum can be single slot, multiple slots or no slots. Cross-sectional dimensions can also be custom-manufactured according to application requirements. With corresponding connectors, you can arrange the aluminum profiles in various ways to create different types of T-slot industial aluminum frames.
T Slot Aluminium,T Slot Aluminum Extrusion,Aluminum T Track Extrusion,T Slot Aluminium Profile,T-Slot profile,V-slot profiles,V-slot profile
Foshan Knilex Aluminum Co., Ltd. , https://www.aluprofilefactory.com