High Pressure Cryogenic Centrifugal Piston Pump for Water Well Drilling

Model NO.: BPO-200-600
Model NO.: BPO-200-600
"BPO-200-600

Liquid Oxygen/Nitrogen/Argon pump Model: BPO-200- 600/16.5, Working pressure: 165 bar, Capacity: 200-600L/h,  5.5Kw 380V@ 50Hz, Brand- new
 
LNG IMMERSED PUMP SKID
Working medium           LNG
Inlet pressure           0.02~1.2MPa
Lift                     250m
Filling quantity         20~40m³/h
LNG LIQUID PUMP PRYING
LNG PUMP SKID
Working medium           LO2  LN2  LAr LCO2  LNG  
Working pressure         2~20MPa
Gas supply capacity      100~5000Nm³/h
LNG HIGH PRESSURE BOOSTING VAPORIZER SKID
Working medium           LNG
Working pressure         20~70MPa
Gas supply capacity      50~10000Nm³/h

High Pressure Cryogenic Centrifugal Piston Pump for Water Well Drilling
  "BPO-200-600

Liquid Oxygen/Nitrogen/Argon pump Model: BPO-200- 600/16.5, Working pressure: 165 bar, Capacity: 200-600L/h,  5.5Kw 380V@ 50Hz, Brand- new
 
LNG IMMERSED PUMP SKID
Working medium           LNG
Inlet pressure           0.02~1.2MPa
Lift                     250m
Filling quantity         20~40m³/h
LNG LIQUID PUMP PRYING
LNG PUMP SKID
Working medium           LO2  LN2  LAr LCO2  LNG  
Working pressure         2~20MPa
Gas supply capacity      100~5000Nm³/h
LNG HIGH PRESSURE BOOSTING VAPORIZER SKID
Working medium           LNG
Working pressure         20~70MPa
Gas supply capacity      50~10000Nm³/h

High Pressure Cryogenic Centrifugal Piston Pump for Water Well Drilling
 

PC Hollow Sheet Line

PC Hollow Sheet Line is applicable to produce PC,PP,PE hollow profile board. The products is used widely for building, decorating, advertisement laying, road noise isolation ,roofing and packing. PP hollow profile board can instead of carton which have feature like light weight, high strengthen, moisture-proof, antisepsis.

Machine part detailed introduction of PC hollow sheet production line/PE hollow sheet production line /PP hollow sheet production line

1. The vacuum calibrator featured with wear-resistance, dirty free and the lifting, falling and leveling for the forming plates is much easier to be controlled.

2. High speed screw, low energy consumption with high rotation speed to match gear pump and stable pressure; output capacity is 25% higher than other brand extrusion lines. because of special design of forming plates.

3. Special designed cooling system for all section of forming plates, and unique designed vacuum system for each section of forming plate.

4. Special designed temperature control oven with cross heat shrink forming, which is much easier to be controlled than other brand extrusion lines.

5. The softness of pull rolls could be customized on request to extend its stretch.

6. The air capacity of hollow sheet and low pressure could be adjusted and controlled slightly, which is easily to be controlled than any other brand extrusion lines.

7. Unique T-Die made by JC Times is specially designed for PP hollow sheet. The thickness of hollow sheet could be from 2mm to 10 mm with twin-wall. The ribbed between walls could be rectangular and diagonal shape.

8. Anti-UV co-extrusion layer could be one sided or two sided, outer surfaces could be sandy or glossy according to configuration requirement.High percentage of recycled flakes could be mixed with the virgin materials.

Pc Hollow Sheet Line,Pc Hollow Sheet Machine,pc hollow sheet extrusion machine,pc pp hollow grid sheet production line

zhangjiagang sevenstars machinery co.,ltd , https://www.zjgsevenstarsmachinery.com